Analytical Instruments

Miltenyi Biotec MACSQuant VYB Flow Cytometer

$0.00

Contact for price

BLE1900338

Shop

Wyatt Dynapro Nanostar with Optional Software Loaded PC

$0.00

Contact for price

BLE20000162

**Software Loaded PC is Optional and available for additional cost

Key Features

Rh from 0.18 nm - 2500 nm
Temperature from -15°C to +150°C
Molecular weight from 300 Da to 1 MDa
Separate, optimized SLS and DLS detection channels
Auto-attenuation over five orders of magnitude

Size Range (Radius) 0.2 to 2500 nm
Static Scattering Molecular Weight Range 300 Da to 1 MDa (sample dependent - maximum molecular radius ~ 12 nm)
Minimum Concentration (lysozyme) *0.1 mg/mL

Optics

Laser Properties

Laser Wavelength 658 nm; 785 nm optional

Laser Power Control Programmable 10% to 100%

Scattering Angle Detected 90°
Sample Cell Options 1.25 µL quartz cuvette

4 µL disposable cyclic olefin copolymer (COC) cuvette

standard 1 cm cuvettes with adapter

Temperature Range -15°C to +150°C †

Dry air or nitrogen required for operation below 20°C

Data Acquisition Time 1 to 3600 s

Electronics

Optical Fiber Multi-Mode
Correlator 512 channels, multi-tau, 100 nsec sampling time
PC ports Ethernet connectivity

Dimensions 60 cm (L) x 36 cm (W) x 18 cm (H)

Weight 13.5 kg (29.8 lbs)

Shop

Wyatt T-REX Optilab

$0.00

Contact for price

BLE2000085

Range -0.0047 to + 0.0047 RIU (Differential Refractive Index Range and Sensitivity), 1.2 - 1.8 RIU (Absolute Refractive Index Range and Sensitivity)
Type Refractive Index Detector
Wavelength Range488 to 690 nm

Shop

Wyatt Technologies Dawn Helios II (Model WH2-09)

$0.00

Contact for price

BLE1900527

The DAWN® HELEOS® II is the premier Multi-Angle static Light Scattering (MALS) detector for absolute characterization of the molar mass and size of macromolecules and nanoparticles in solution. The DAWN offers the highest sensitivity, the widest range of molecular weight, size and concentration, and the largest selection of configurations and optional modules for enhanced capabilities.

The DAWN is most often used in conjunction with Gel Permeation Chromatography (GPC-MALS) or Size Exclusion Chromatography (SEC-MALS) or Field-Flow Fractionation (FFF-MALS) to determine distributions of mass, size and composition independent of column calibration by reference standards.

Included with each DAWN is a copy of ASTRA, the most versatile software package available for analysis of online multi-angle and dynamic light scattering.

Measurements

Molar Mass Range 200 Da to 1000 MDa1

Molecular Size Range (rg)≈ 10 to 500 nm1, up to 1000 nm with shape-specific models

Molecular Size Range (Rh,with WyattQELS DLS module or DynaPro NanoStar) Depends on the scattering angle:

In flow mode, 0.5 nm – 300 nm1,2

batch mode, 0.5 nm – 1 µm1

Sensitivity 10 ng of 100 kDa polystyrene in THF3

200 ng of BSA in PBS4

Fluidics

Mobile Phase Compatibility All-solvent compatible (aqueous and organic). Wetted materials are 316 stainless steel, fused silica or F2 glass, and Kalrez.

Optics

Detectors

MALS Detectors High-gain, high dynamic range, static light scattering detectors at 18 angles.

Auxiliary Detectors Laser monitor for stabilization feedback; forward transmission monitor to correct signals for absorbing samples and to assess data quality.

A/D Resolution 24 bit (detector dynamic range > 16,000,000) -

WyattQELS dynamic light scattering module installs directly inside the DAWN chassis.

DLS Detector (optional)

Alternatively, the optical fiber pickup of the DynaPro NanoStar cuvette-based DLS instrument may be installed in the DAWN.Laser Properties Laser Wavelength658 nm; 785 nm available for fluorescence reduction (with lower sensitivity than 658 nm) Laser Power ControlProgrammable 10% - 100%Flow CellsFused Silica, optimal for solvent refractive index less than 1.50

F2, optimal for solvent refractive index above 1.50Temperature OptionsAmbient

Heated/Cooled (HC) -15°C to +150°C

Ultra-High-Temperature (UHT) ambient to +210°CElectronics Analog Inputs4 differential analog inputs with 24 bit resolution. Input range -10 V to +10 V Analog Outputs2 analog outputs from user settable measurements channels -10 V to +10 V Other Inputs/OutputsAlarm in, Alarm retransmit, Auto-Inject in, Auto inject contact closure, Recycle in, Recycle valve power Computer Interface Ethernet Transmission Rate36.6 to 0.0001 Hz Front Panel Display162.5 mm, 16-bit, high resolution touch screen displays signal graphs, instrument settings and diagnosticsDimensions60 cm (L) x 36 cm (W) x 23 cm (H)

Shop

Wyatt Technologies Dawn Helios II (Model WH-02)

$3,700.00

Free shipping available

BLE2000163

Measurements

Molar Mass Range 200 Da to 1000 MDa1

Molecular Size Range (rg)≈ 10 to 500 nm1, up to 1000 nm with shape-specific models

Molecular Size Range (Rh,with WyattQELS DLS module or DynaPro NanoStar) Depends on the scattering angle:

In flow mode, 0.5 nm – 300 nm1,2

batch mode, 0.5 nm – 1 µm1

Sensitivity 10 ng of 100 kDa polystyrene in THF3

200 ng of BSA in PBS4

Fluidics

Mobile Phase Compatibility All-solvent compatible (aqueous and organic). Wetted materials are 316 stainless steel, fused silica or F2 glass, and Kalrez.

Optics

Detectors

MALS Detectors High-gain, high dynamic range, static light scattering detectors at 18 angles.

Auxiliary Detectors Laser monitor for stabilization feedback; forward transmission monitor to correct signals for absorbing samples and to assess data quality.

A/D Resolution 24 bit (detector dynamic range > 16,000,000) -

WyattQELS dynamic light scattering module installs directly inside the DAWN chassis.

DLS Detector (optional)

F2, optimal for solvent refractive index above 1.50Temperature OptionsAmbient

Heated/Cooled (HC) -15°C to +150°C

Click 'buy now' through our site to checkout with free shipping! We accept major credit cards

Shop

Wyatt Technology Optilab rEX Model WREX-06 RI Detector

$2,900.00

BLE2000164

Free shipping available

Major Specifications:

Differential Refractive Index Range & Sensitivity:Range (RIU) -0.0047 — + 0.0047, Peak-to-peak noise (RIU)* ± 7.5 x 10-10

High Concentration Option T-rEX: Range (RIU) -0.0026 — + 0.034, Peak-to-peak noise (RIU)* ±1.5 x 10-9

Fluid Volumes: Flow cell 7.4 μL, Inlet tubing (0.010” ID) 44 μL, Outlet tubing (0.030” ID) 370 μL

Dynamic Range: 22+ bits only via digital communication

Response Time: 0.1 - 5 seconds, user selectable

Absolute Refractive Index Range and Sensitivity: 1.2 - 1.8 RIU (sensitivity of ± 0.002 RIU)

Light Source: 660 nm standard; Other wavelengths available

Sample Temperature Control Range: 4°C - 50°C, temperature regulated

Temperature Regulation: ± 0.005°C

Maximum System Pressure: 30 psi (2 bar)

Maximum Cell Pressure: 100 psi (7 bar)

Safety Sensors: Vapor and liquid (leak)

Inputs and Outputs: Analog In 16 bit ± 10V A/D for auxiliary user data, Analog Out 18 bit D/A for dRI data, ± 10V or ± 1V output

Inputs: Zero, Purge, Recycle, Autoinject, Alarm In

Output: Autoinject Retransmit, Alarm Out, External Solenoid, Recycle Valve. 12VDC solenoid valve (sold separately, or user supplied) to switch automatically between waste and recycle

Click 'buy now' through our site to checkout with free shipping! We accept major credit cards

Shop

Rudolph Research Analytical Autopol IV Automatic Polarimeter

$0.00

Contact for price

BLE1900405

Shop

Rudolph Research Analytical Autopol V Plus (Part # A22502)

$0.00

BLE1900005

Contact for price

Measuring Mode: Optical Rotation, Specific Rotation, Concentration & User-defined Scales
Measuring Scale: Degrees Arc, % Concentration
Measuring Range: ±89.9° Arc Optical Rotation, ±999.99° Arc Specific Rotation and 0-99.9% Concentration
Selectable Resolution: 0.01°, 0.001°, 0.0001° Arc Optical Rotation 0.001% Concentration 0.001° Specific Rotation
Reproducibility: 0.002° Arc
Standard Model Accuracy: 0.002° up to 1°, 0.2% up to 5°, 0.01° above 5°
AP Model Accuracy and Resolution: (Autopol V Plus Single: ±0.002° Arc over ±89.9° Arc. Autopol V Plus Six Wavelength (546nm and 589nm): ±0.002° over ±89.9° Arc. Selectable Resolution 0.01°, 0.001°, 0.0001° Arc Optical Rotation
Prism: Glan Thompson calcite quartz
Optical Wavelengths: 365nm, 405nm, 436nm, 546nm, 589nm, 633nm (other wavelengths available)
Wavelength Selection: Automatic by push-button
TempTrol™ Range: Automatic Electronic Heating & Cooling 15°-35°C
TempTrol™ Accuracy: ±0.2°C
Temp. Probe Range: 10°-40°C T
emp. Probe Accuracy: ±0.1°C
Acid Resistance: Hastelloy™ measurement cell and Silco Steel™ sample chamber (standard)
Measurement Time: 4°/sec. slew rate and 5 sec. nominal settling time
Light Source: Tungsten-halogen 6V, 20W, avg. 2,000 hour life
Sample Chamber: Accepts sample tubes up to 200mm
Data Storage/Internal Memory: 2 GB Non-removable Compact Flash
Communication Interface: Touch Screen, 3 – USB Ports, 2 – RS232 Ports, Ethernet Port for Network Connection, Keyboard, Bar Code Scanner, Mouse, Network Capabilities
Calibration: Automatic calibration by push-button
Display: 10.4 inch diagonal, 800-600 pixels, color, Flat Panel Monitor with Resistant Touch Screen Interface, 200 nits brightness, gasketted for spill protection
User Interface: Touchscreen
Automatic Sensitivity Control: Measures samples with transmittance as low as 0.01% (up to O.D. 4.0)
Input Power: 85 – 260 VAC; 48 – 62 Hz, 150 – 200 Watts consumption
Operating Dimensions: 32"W x 11.5"H x 18"D 813mm W x 292mm H x 457mm D
Shipping Dimensions: 43"W x 28"H x 23"D 1,411mm W x 919mm H x 722mm D
Operating Weight: 90 lbs. (41kg)
Shipping Weight: 140 lbs. (64kg)

Shop

Rudolph Research Analytical Autopol V (Part # A20766)

$0.00

BLE2000003

Contact for price

The AUTOPOL V Automatic Polarimeter is designed for today’s FDA regulated analytical laboratories. Whether you are a Pharmaceutical, Nutraceutical or University Lab, the AUTOPOL V has the standard measurement and compliance features you must have, including:

21CFR Part 11 Compliant
Temptrol™ Electronic Heating and Cooling
Six standard wavelengths
Touch panel user interface
Designed for use in FDA regulated Pharmaceutical, Nutraceutical and cGMP/GLP laboratories

AUTOPOL V SpecificationsMeasuring ModeOptical Rotation

Specific Rotation

Specific Rotation Plus Concentration

User Defined Scale

Sugar Degrees

°Z(ISS)

Measuring ScaleDegrees Arc, % Concentration

Measuring Range± 89.9° Arc Optical Rotation

± 999.99° Arc Specific Rotation

0-99.9% Concentration

Resolution0.001° Arc Optical Rotation

0.001% Concentration

0.001 Specific Rotation

Reproducibility0.002° Arc

Standard Model Accuracy0.002° up to 1°, 0.2% up to 5°, 0.01° above 5°

AP Model SpecsAccuracy (546nm and 589nm): ±0.002° Arc over ±89.9° Arc

Accuracy for other wavelengths is the same as the standard model

Selectable Resolution 0.01°, 0.001°, 0.0001° Arc Optical Rotation

PrismGlan Thomson calcite quartz

Optical Wavelengths365nm, 405nm, 436nm, 546nm, 589nm, 633nm

(other wavelengths available)

Wavelength SelectionTouchscreen Selectable: 6 standard

TempTrol™ RangeAutomatic Electronic Heating & Cooling 15°-35°C (Standard) ±0.2° C (Standard)

TempTrol™ Accuracy±0.2°C

Temp. Probe Range10°-100°C

Temp. Probe Accuracy±0.1°C

Acid ResistanceHastelloy™ measurement cell and Silco Steel™

sample chamber (optional)

Measurement Time4°/sec slewing rate & 5 sec nominal settling time

Light SourceTungsten-halogen 6V, 20W, avg. 2,000 hr life

Sample ChamberAccepts sample tubes up to 200mm

Data Storage32 GB Non-removable Compact Flast

Communication Interface3 - USB Ports

2 - RS232 Ports

Ethernet Port for Network Connection

CalibrationAutomatic calibration by push-button

Operating SystemWindows® Embedded

Display8 inch color LCD with LED backlight providing 800 x 600 resolution with 400 nits of luminance

User InterfaceTouchscreen

Automatic Sensitivity ControlMeasures samples with transmittance as low as 0.01 % (up to O.D. 4.0)

Input Power100-240 VAC, 50/60 Hz

Operating Dimensions30"W x 17"H x 10.5"D,

762mm W x 432mm H x 267mm D

Shipping Dimensions30"W x 11.5"H x 17"D,

762mm W x 431.8mm H x 279.4mm D

Operating Weight85 lbs (39 kg)

Shipping Weight120 lbs. (54kg)

Shop

Agilent 8453 UV Vis Spectrophotometer with 8 Position Multicell Transport, Windows 10 PC, Keybaord and Mouse

$7,400.00

Contact to purchase

BLE1900246

Includes Windows 10 PC with Chemstation B.05.04(8)

Monitor

Keyboard

Mouse

The Agilent 8453 UV-Visible Spectrophotometer G1103A uses a photodiode array (PDA) for simultaneous measurement of the complete ultra-violet to visible light spectrum in less than one second. The PDA technique brings exceptional reliability and repeatability. Using Agilent ChemStation software you get powerful data analysis and data archival to ensure compliance with good laboratory practices (GLP) and pharmacopoeia requirements. The HP 8453 spectrophotometer is a single-beam, microprocessor-controlled UV-Vis spectrophotometer with collimating optics, 190-1100nm wavelength range, 1nm slit width, ±0.5nm wavelength accuracy, less than 0.03 percent stray light, -10C to 120C temperature set range.

Features:

Fast results, UV-Vis spectral acquisition and analysis in less than 1 second

Excellent reproducibility, stable optics, low noise electronics, no moving parts

Simple operation, task-oriented and application software (not included), direct access to cells and cell holder

Effortless servicing, pre-aligned deuterium and tungsten lamps exchanged easily

Good laboratory practices (GLP), self-test and revisions built into the software (not included)/firmware

Pharmaceutical complianc regulated software for European and US pharmacopoeia

8 position 1cm sqaure cell holder.

Shop

Agilent 8453 UV Vis Spectrophotometer with 8 Position Multicell Transport, Windows 7 PC, Keybaord and Mouse

$6,900.00

Contact to purchase

BLE1900425/BLE1900428

Includes Windows 7 PC with Chemstation B.05.04(8)

Monitor

Keyboard

Mouse

Features:

Fast results, UV-Vis spectral acquisition and analysis in less than 1 second

Excellent reproducibility, stable optics, low noise electronics, no moving parts

Simple operation, task-oriented and application software (not included), direct access to cells and cell holder

Effortless servicing, pre-aligned deuterium and tungsten lamps exchanged easily

Good laboratory practices (GLP), self-test and revisions built into the software (not included)/firmware

Pharmaceutical complianc regulated software for European and US pharmacopoeia

8 position 1cm sqaure cell holder.

Shop

Agilent Technologies 8453 7 Cuvette UV Vis Spectrophotometer with Software Loaded PC, Monitor, Keyboard and Mouse

$5,900.00

Contact to purchase

BLE1900244

System includes:

Dell Optiplex PC loaded with Windows XP
Installed Chemstation software v. b.01.01(21)
Monitor
Keyboard & Mouse

Shop

Agilent Technologies 8453 Single Cuvette Ultraviolet Visible Spectrophotometer with Software loaded PC, Monitor, Keyboard and Mouse

$4,900.00

Contact to purchase

BLE1700171

Includes Windows 10 ThinkCentre PC loaded with Chemstation B.05.04(8)

Features:

Fast results, UV-Vis spectral acquisition and analysis in less than 1 second

Excellent reproducibility, stable optics, low noise electronics, no moving parts

Simple operation, task-oriented and application software (not included), direct access to cells and cell holder

Effortless servicing, pre-aligned deuterium and tungsten lamps exchanged easily

Good laboratory practices (GLP), self-test and revisions built into the software (not included)/firmware

Pharmaceutical complianc regulated software for European and US pharmacopoeia

8 position 1cm sqaure cell holder.

Shop

Agilent 8453 G1103A Spectrophotometer with PC, Monitor, Keyboard and Mouse

$4,900.00

Contact to purchase

BLE1900156

Shop

Perkin Elmer Lambda 40 UV/Vis Spectrometer

$0.00

Contact for price

BLE1800032

Includes Windows 10 with UV Winlab Loaded PC

The Perkin Elmer Lambda 40 is a laboratory grade double-beam UV/Vis spectrometer. LAMBDA systems are easy to operate and deliver results you can trust with the minimum of operator training. The instrument can be operated by the front panel display or through the remote interface. Fast scan speeds, accuracy, high-resolution, low stray light, and several modes of operation are features of the Lamda 40.

190-1100nm Wavelength Range
0.1nm Wavelength Accuracy
-3 to 3 A Photometric Range
Stand-Alone or Computer-Controlled Operation

Wavelength Range (nm) 190 - 1100

Wavelength Accuracy (±nm) 0.1

Wavelength Repeatability (±nm) 0.05

Resolution (nm) 0.5

Max Scan Speed (nm/min) 2800

Monochrometer Single, Grating

Stray Light %T @ 340nm 0.01

Photometric Range (A) -3 to 3

Photometric Accuracy (A) ±0.003

Baseline Stability (A/hr) 0.00015

Baseline Flatness (A) ± 0.0005

Slit Widths (motorized) 0.5, 1.0, 2.0, 4.0 mm

Display Digitial, Touch Key

Source Types Halogen, D2

Dimensions: D57 x W65 x H26

Weight: 57 lbs.

Power: 110V to 240VAC, 50/60Hz

Shop

Perkin Elmer Lambda35 Uv-Visible Spectrophotometer

$0.00

Contact for price

SN 502S09102209

Fully tested and ready to ship. Spectrometer is in excellent condition. 30 Day Money Back Guarantee!!!

Software Loaded PC included. UV Winlab Version 6.0.4

The Perkin-Elmer Lambda™ 25/35/45 UV/Visible Spectrophotometers increase productivity by mimicking the QA workflow to generate high-quality results the first time, every time. And that’s exactly what the user needs in a busy laboratory when the pressure’s on and it’s the user's job to keep the results flowing. LAMBDA systems are easy to operate and deliver results the user can trust with the minimum of operator training. With Perkin-Elmer's complete range of LAMBDA systems it’s easy to develop simple, robust methods and ensure they’re followed without mistakes. And, whichever LAMBDA system is choosen, the user's day-to-day UV/Vis analyses will be faster, simpler and more dependable than ever before.

UV WinLab™ software works the way the user works, guiding the user through a step-by-step process that simplifies analysis from sample entry to report generation, eliminating costly mistakes and delivering rapid results. The user can rely on Perkin-Elmer's proven technology to deliver consistently high-quality results over the lifetime of the system, and the user can confirm those results with Perkin-Elmer's extensive suite of Instrument Performance Verification (IPV) tests. For FDA-regulated industries, the Enhanced Security™ (ES) version of UV WinLab integrates seamless 21 CFR Part 11 technical compliance without slowing the user down.

FeaturesTrue Double-Beam Operation
Sealed and Quartz-Coated High-Throughput Optics
Fast Scanning
Prealigned Deuterium and Tungsten Halogen Lamps
Technical description and specifications - Lambda 35Part # L6020064
Wavelength Range - 190-1100nm
Bandwidth - 0.5, 1, 2, 4 nm varuabke
Stray Light - At 220nm (Nal) < 0.01%T
At 340 nm (NaNO2) < 0.01%T
At 370 nm (NaNO2) < 0.01%T
At 200 nm (KCI) < 1%T
Wavelength Accuracy - At D2 peak (656.1 nm) ±0.1 nm
Wavelength reproducibility - 10 measurements at 656.1 nm ±0.05 nm
Photometric Accuracy - At 1 A using NIST 930D filter ±0.001 A
At 2 A using NIST 1930D filter ±0.005 A
Potassium dichromate ±0.010A
Photometric reproducibility - Maximum deviation of 10 measurements at 1 A < 0.001 A
Photometric stability - Stability at 1 A, at 500 nm with 2-sec. response time < 0.00015 A/hour
Photometric noise at 500 nm (RMS) - Noise 500 nm/0 A RMS Slit 1 nm < 0.00005 A
Baseline flatness - Slit 1 nm ±0.001 A
Construction Solid CNC-machined aluminum chassis for thermal and vibration stability
Optics Double-beam, sealed, quartz-coated mirrors; lens-free system to reduce chromatic aberrations
Monochromator Seya Namioka
Grating Holographic, concave grating with 1053 lines per mm
Source Deuterium and Tungsten prealigned sources with automatic switch-over
Size (W x D x H) 650 mm (25 in.) x 560 mm (22 in.) x 233 mm (9 in.)
Weight (approx.) 26 kg (57 lbs)

Shop

Advanced Instruments 2020 Osmometer

$4,950.00

Contact to purchase
SN 06070645A/01111330C

Automated, multi-sample, designed to process a 20uL sample with a 90-second test time. The Model 2020 provides maximum productivity, accuracy and reliability.
• Up to 20 samples at one time
• 20 µL sample size is ideal for applications where the sample quantity is limited.
• Stat sample capability
• Multi-language operation
• On-board statistical analysis
• Results recall up to the last 200 tests
• On-board printer
• Connects easily to external barcode scanner
• Internal diagnostics
• Ergonomic, compact design
• Automated calibration
Electrical

Power Requirement: 100 to 240 VAC (50-60 Hz)
Fuses (2): 250V time delay (Type T): 2-Amp
Power Consumption: 80 Watts
Memory Backup: Integral lithium cell; 10-year life (typical); (not user-replaceable)
Sample Volume: 20 μL
Sample Capacity: Up to 20 samples
Readout: 2 line by 24-character vacuum fluorescent display
Units: mOsm/kg H2O
Range: 0 to 2000 mOsm/kg H2O
Resolution: 1 mOsm/kg H2O
Communications: On-board printer, DTE EIA-232/V.24 (RS-232) serial port and optional barcode scanner
Performance at Reference Conditions1
Linearity: ±3 mOsm/kg between 0 and 300 mOsm/kg H2O; less than ±1% above 300 mOsm/kg H2O
Repeatability: 0 to 400 mOsm: ±3 mOsm/kg (1 S.D.) 400 to 2000 mOsm: ±0.75% (1 S.D.)
Drift: Less than 1 mOsm/kg H2O per month
Performance Over Operating Conditions
Temperature Effects: Less than 1 mOsm/kg H2O for every 5°C (9°F) ambient temperature change
Operating Conditions Temperature: 18°C to 35°C (64°F to 95°F)
Humidity: 30 to 80% relative humidity (non-condensing)
Storage Temp.: -40°C to +45°C (-40°F to +113°F)
Start-up Time: Immediately from stand-by; under 5 minutes from power-on
Test Time: 90 seconds per sample, typical
Sample Throughput: 35 to 40 per hour
Dimensions 29.0cm x 40.6 cm x 31.0 cm, (11.4" H x 16.0" W x 12.2" D)
Weight Net: 10.0 kg (22.0 lbs.), Shipping: 15.5 kg (34.0 lbs.)

Shop

Advanced Instruments 3320 Osmometer with Optional Printer and Optional EZ Eject Sampler

$5,900.00

Sold out

BLE1800328Please contact to purchase

Excellent condition, tested and ready to ship. Includes 30 day money back guarantee!

Advanced Instruments Osmometer, Model 3320, for Osmolality Measurement

The Advanced Instruments Model 3320 Micro Osmometer determines the osmolality of solutions using freezing point depression (FPD). It is Ideal for serum, urine or other bodily fluids in clinical applications; and media or formulations in pharmaceutical, biotech or industrial applications.

Automated, single sample, designed to process a 20 μL sample, and one-minute test time, allows the Model 3320 to provide the best accuracy and precision in the market today.

20 μL is ideal for applications where the sample quantity is limited.
Unparalleled ease of use
Internal diagnostics
Ergonomic, compact design
On-board statistical analysis
Results recall the last 30 tests
Multi-language operation
Automated calibration
Password lock out
Hot-Line® Technical Service available 24/7Advanced Instruments also supplies ControLine Products
Clinitrol™ 290 mOsmol Reference Solution
Protinol® Protein-based Controls
Renol™ Urine Osmolality Contols
Linearity Osmolality Controls

Performance at Reference Conditions

Linearity: Less than ±1% from a straight line over calibrated range

Repeatability: 0 to 400 mOsm: ±2 mOsm/kg (1 S.D.) 400 to 2000 mOsm: ±0.5% (1 S.D.)

Drift: Less than 1 mOsm/kg H2O per month

Performance Over Operating Conditions

Temperature Effects: Less than 1 mOsm/kg H2O for every 5°C (9°F) ambient temperature change

Operating ConditionsTemperature: 18°C to 35°C (64°F to 95°F)

Humidity: 5 to 80% relative humidity (non-condensing)

Storage Temp.: -40°C to +45°C (-40°F to +113°F)

Start-up Time: 30 seconds from power-on

Test Time: 60 seconds

Dimensions

35.5 cm x 35.5 cm x 38.1 cm

(14.0" H x 14.0" W x 15.0" D)

Weight

Net: 6.1 kg (13.4 lbs.)

Shipping: 11.4 kg (25.0 lbs.)

Shop

YSI Biochemistry Analyzer

$0.00

Contact for price

BLE2000059

Benchtop: Yes
Certifications ETL, RoHS, CE
Compliance21 CFR, Part 11
GAMP® 5
Connectivity / Communications Ethernet, USB
Graphic Display: Yes
Measurement Range Glucose: 0.05-25 g/L, Lactate: 0.05-2.70 g/L, Glutamate: 15-1460 mg/L, Glutamine: 30-1169 mg/L, Glycerol: 0.75-40 g/L, Xylose: 0.5-30 g/L, Choline: 5-450 mg/L, Hydrogen Peroxide: 3-300 mg/L, Sucrose: 0.1-25 g/L, Ethanol: 0.04-3.2 g/L, Ethanol-HC: 0.5-40 g/L, Methanol: 0.1-2.5 g/L, Lactose: 0.05-25 g/L, Galactose: 0.1-25 g/L
Memory Yes
Operating Temperature 15-35°C
Parameters Measured Glucose, Lactate, Glutamate, Glutamine, Glycerol, Xylose, Choline, Hydrogen Peroxide, Sucrose, Ethanol, Methanol, Lactose, Galactose
Power 100-240 VAC, 50-60 Hz
Precision Application specific, typical CV <2%
Unit of Measure mg/dL, mg/L, g/L, %, mmol/L

Shop

YSI 2950D-1 Biochemistry Analyzer

$0.00

Sold out

Contact for price

BLE1900496

Shop

YSI 2900D Biochemistry Analyzer

$0.00

Contact for price

BLE1900447

Benchtop: Yes
Certifications ETL, RoHS, CE
Compliance21 CFR, Part 11
GAMP® 5
Connectivity / Communications Ethernet, USB
Graphic Display: Yes
Measurement Range Glucose: 0.05-25 g/L, Lactate: 0.05-2.70 g/L, Glutamate: 15-1460 mg/L, Glutamine: 30-1169 mg/L, Glycerol: 0.75-40 g/L, Xylose: 0.5-30 g/L, Choline: 5-450 mg/L, Hydrogen Peroxide: 3-300 mg/L, Sucrose: 0.1-25 g/L, Ethanol: 0.04-3.2 g/L, Ethanol-HC: 0.5-40 g/L, Methanol: 0.1-2.5 g/L, Lactose: 0.05-25 g/L, Galactose: 0.1-25 g/L
Memory Yes
Operating Temperature 15-35°C
Parameters Measured Glucose, Lactate, Glutamate, Glutamine, Glycerol, Xylose, Choline, Hydrogen Peroxide, Sucrose, Ethanol, Methanol, Lactose, Galactose
Power 100-240 VAC, 50-60 Hz
Precision Application specific, typical CV <2%
Unit of Measure mg/dL, mg/L, g/L, %, mmol/L

Shop

YSI 2900D Biochemistry Analyzer

$0.00

Contact for price

BLE2000059

Benchtop: Yes
Certifications ETL, RoHS, CE
Compliance21 CFR, Part 11
GAMP® 5
Connectivity / Communications Ethernet, USB
Graphic Display: Yes
Measurement Range Glucose: 0.05-25 g/L, Lactate: 0.05-2.70 g/L, Glutamate: 15-1460 mg/L, Glutamine: 30-1169 mg/L, Glycerol: 0.75-40 g/L, Xylose: 0.5-30 g/L, Choline: 5-450 mg/L, Hydrogen Peroxide: 3-300 mg/L, Sucrose: 0.1-25 g/L, Ethanol: 0.04-3.2 g/L, Ethanol-HC: 0.5-40 g/L, Methanol: 0.1-2.5 g/L, Lactose: 0.05-25 g/L, Galactose: 0.1-25 g/L
Memory Yes
Operating Temperature 15-35°C
Parameters Measured Glucose, Lactate, Glutamate, Glutamine, Glycerol, Xylose, Choline, Hydrogen Peroxide, Sucrose, Ethanol, Methanol, Lactose, Galactose
Power 100-240 VAC, 50-60 Hz
Precision Application specific, typical CV <2%
Unit of Measure mg/dL, mg/L, g/L, %, mmol/L

Shop

YSI 2700-D SELECT Biochemistry Analyzer

$2,200.00

Contact to Purchase

Specifications

Analyzer

Aspirated sample volume: User selects 5 to 65 microliters
Analysis time: 60 seconds
Precision: <2% cv, n=10
Linearity: ±5%, calibration value to range maximum
Calibration: User selects frequency Size: 35.6 x 25.4 x 35.6 cm, 11.4 kg (14 x 10 x 14 inches, 25 lbs)
Working environment: 15 to 35°C ambient temperature, 10 to 90% relative humidity (noncondensing)
Power: 110 to 120 volts, 50/60 Hz, 1.0 amp, 3-wire grounded. 220 to 240 volts, 50/60 Hz, 3-wire grounded
Battery backup: Rechargeable Ni-Cad batteries to back up RAM.

Monitor

Sample inlet tubing: Silicone, 0.08" OD x 0.02" ID; Volume: 5.1 microliters per inch
Inlet channel pump tubing: PharMed® 0.13" OD x 0.035" ID Valve tubing: 0.03" ID Wasteline tubing: Silicone, 0.16" OD x 0.10" ID
Nominal flow rate (inlet line): 100 to 2500 microliters per minute (±8% @ ±6 PSI)
Sample interval: 2 minutes to 1,000 hours

Shop

YSI 2700-D Biochemistry Analyzer

$2,700.00

Free shipping available

BLE1900059

Specifications

Analyzer

Aspirated sample volume: User selects 5 to 65 microliters
Analysis time: 60 seconds
Precision: <2% cv, n=10
Linearity: ±5%, calibration value to range maximum
Calibration: User selects frequency Size: 35.6 x 25.4 x 35.6 cm, 11.4 kg (14 x 10 x 14 inches, 25 lbs)
Working environment: 15 to 35°C ambient temperature, 10 to 90% relative humidity (noncondensing)
Power: 110 to 120 volts, 50/60 Hz, 1.0 amp, 3-wire grounded. 220 to 240 volts, 50/60 Hz, 3-wire grounded
Battery backup: Rechargeable Ni-Cad batteries to back up RAM.

Monitor

Sample inlet tubing: Silicone, 0.08" OD x 0.02" ID; Volume: 5.1 microliters per inch
Inlet channel pump tubing: PharMed® 0.13" OD x 0.035" ID Valve tubing: 0.03" ID Wasteline tubing: Silicone, 0.16" OD x 0.10" ID
Nominal flow rate (inlet line): 100 to 2500 microliters per minute (±8% @ ±6 PSI)
Sample interval: 2 minutes to 1,000 hours

Click 'buy now' through our site to checkout with free shipping! We accept major credit cards

Shop

Magellan Instruments Tandem PRO Gas Analyzer

$2,490.00

Contact us to purchase.
SN 0381-PRO
LIKE NEW CONDITION!!!! Tested and ready to ship. Includes a 30 Day Money Back Guarantee!!!

The Tandem PRO is a self-contained O2 & CO2 gas analyzer. The PRO system comes with an internal gas pump and programmable display. It includes calibration functions, error reporting and dual 4-20mA outputs. An RS232 output is included for integration into control systems.
The Tandem PRO is incredible value and offers you all these benefits:

Greater understanding of your cells and processes
Physiological state measurement on-line
Scale-up and scale-down predictions
Batch variation studies: feature analysis
Metabolic flux analysis and mass-balance calculations

Increase the reliability and repeatability of your processes

Accurate fed-batch control
Repeatable event decisions: induction, infection, harvesting etc.
Batch variation studies: anomaly analysis

Automate your processes

Metabolic activity based feeding
Repeatable event decisions: induction, infection, harvesting etc.

Dedicated, continuous, standard signals for all your reactors

On-line information, allows real-time calculation of RQ, CER, OUR, growth rate, KLa etc.
0-10V and 4-20mA, with RS232 on PRO & Multiplex
Integrates to any reactor size (250ml – 100m3)

Shop

Nova Biomedical Bioprofile CDV Cell Density and Viability Analyzer

$0.00

Contact for price

BLE1800173

Shop

Nova Biomedical Bioprofile 100

$2,500.00

Contact to purchase
The BioProfile 100 offers eight measured tests including

glutamine,
glutamate,
glucose,
lactate,
ammonium,
pH,
sodium
potassium,
calculated osmolality.

The BioProfile 100 offers a convenient 40-position sample tray that enables batch processing with full walkaway automation.

Shop

Nova Biomedical Bioprofile 300 Automated Chemistry Analyzer

$3,750.00

Contact to purchase

SN T03709010

This system offers measurement ranges specifically suited to bacterial fermentation. Features automatic calibration, one-button analysis and batch processing capability.

Nutrients/Metabolites: Glucose, Lactate, Ammonium, Acetate, Phosphate, also reports phosphorus
Acid/Base Status: pH
Electrolytes: Sodium, Potassium
Calculated Parameter: Osmolality

Shop

Nova Biomedical Bioprofile 400 Analyzer

$4,750.00

Contact to purchase

BLE1800341/BLE1800342

Nutrients/Metabolites: Glutamine, Glutamate, Glucose, Lactate, Ammonium
Acid/Base Status: pH, PO2, PCO2
Electrolytes: Sodium, Potassium
Calculated Parameter: Osmolality, Air Saturation, CO2, Saturation, HCO3

Shop

Pharma Visions SPD Automated Powder Analyzer

$1,900.00

Contact Us to Purchase

SN 1307

Shop

Agilent 2100 Bioanalyzer Including G2938A Chip Reader, VWR MV1 Mini Vortexter, Chip Priming Station, PC, Keyboard & Mouse

$6,400.00

Sold out

BLE1700256

System Includes:

Agilent 2100 Bioanalyzer

Agilent G2938A Chip Rader

VWR MV1 Mini Vortexter

Agilent Chip Priming Station (Like new condition, in original box)

Excellent working condition, tested and ready to ship. Includes a 30 Day Money Back Guarantee!!!

Weight 10 kg (22 lbs)
Dimensions (w × d × h)162 × 412 × 290 mm (6.4 × 16.2 × 11.4 in)
Line voltage 100-240 VAC
Line frequency 50-60 Hz
Power consumption 60 VA
Ambient operating temperature15 – 27 °C (59 – 80 °F)
Safety standards: IEC, CSA, ULInstallation Category II, Pollution Degree 2, Laser Class 1

Click 'buy now' through our site to checkout! We accept major credit cards.

Shop

Hewlett Packard 8453 UV Vis Spectrophotometer with Software Loaded PC, Monitor, Keyboard and Mouse

$4,900.00

Sold out

Contact to purchase

BLE1700074

System includes:

ThinkCentre PC loaded with Windows 10
Installed Chemstation software v. b.05.04(8)
Monitor
Keyboard & Mouse

Features:Fast results, UV-Vis spectral acquisition and analysis in less than 1 second
Excellent reproducibility, stable optics, low noise electronics, no moving parts
Simple operation, task-oriented and application software (not included), direct access to cells and cell holder
Effortless servicing, pre-aligned deuterium and tungsten lamps exchanged easily
Good laboratory practices (GLP), self-test and revisions built into the software (not included)/firmware
Pharmaceutical complianc regulated software for European and US pharmacopoeia
8 position 1cm sqaure cell holder.

Shop

Wescor Vapro Vapor Pressure Osmometer

$3,990.00

Sold out

Contact to Purchase

SN 55200830

Excellent Condition, tested and ready to ship. Includes 30 day money back guarantee!

Sample Volume 10 uL nominal
Measurement Range Typically 0 to 3200 mmol/kg @ 25C ambient
Measurement Time 75 seconds
Resolution 1 mmol/kg
Repeatability Linearity Readout Standard deviation = 2 mmol/kg, 2%
Operating Temperature 15 to 37C ambient
Calibration Automatic using Opti-mole™ osmolality standards (Not Included)

Shop

Thermo Scientific LTQ Orbitrap XL with Proxeon Easy-nLC II

$0.00

Sold out

Complete System with Proxeon Easy nLC II - Hybrid FT Mass Spectrometer

Protein Identification

High mass accuracy lowers false positive rates
Parallel acquisition mode optimizes productivity
High MS and MS/MS sensitivity, wide dynamic range and fast cycle times increase protein identifications

Biomarker Discovery

HCD collision cell provides high fragmentation efficiency combined with high sensitivity for the reporter and fragment ions of the peptide sequence
Reliable identification and quantification in one experiment

De novo Sequencing

High mass accuracy and high resolution leads to high confidence de novo sequencing results
Multiple collision modes (CID and HCD) provide comprehensive structural information

Metabolite Profiling and Identification

High mass accuracy, sensitivity, and dynamic range enable reliable profiling of low-abundance
metabolites in complex mixtures

See more at: http://www.thermoscientific.com/en/product/ltq-orbitrap-xl-hybrid-ion-trap-orbitrap-mass-spectrometer.html#sthash.1ZiRtB8j.dpuf

Shop

Beckman Coulter VI-Cell XR Cell Viability Analyzer

$0.00

Sold out

Contact for Price

SN AM24149

Excellent condition, tested and ready to ship. Includes 30 day money back guarantee!

Features

Viability testing
Total cell concentration
Total viable cell concentration
Mean cell size
Real time cellular images
Bioprocess monitoring
Validated reagents
Convenient reagent pack

Benefits

Fast automated cell staining & cell counting (< 2.5 mins) with customizable cell types
Distinguishes between viable and non-viable cells across a wide range of cell types with confidence
Software with pre-programmed cell types (CHO, yeast, hybridoma) as well as option to design custom analysis type for specific cell lines
Automated cell counting, staining & disposal
Operator bias eliminated with automated protocols

Shop

Rudolph Research Analytical Autopol III Polarimeter

$0.00

Sold out

BLE1800356

Contact for price

Shop

Agilent G2938A 2100 Series Bioanalyzer with Priming Station, IKA MS3 Basic Shaker, PC, Monitor Keyboard & Mouse

$8,200.00

Sold out

Contact Us to Purchase

The Agilent 2100 Bioanalyzer system provides sizing, quantitation and quality control of DNA, RNA, proteins and cells on a single platform, providing high quality digital data.

Two assay principles - electrophoresis and flow cytometry
Ready-to-use assays and pre-packaged reagent kits
Minimal sample consumption (1-4 µL)
Easy to use – load the chip, press “start“, the instrument does the rest!
Digital data for convenient analysis, archiving and storage
Contamination-free switch of methods

Shop

Shimadzu ON-LINE TOC-VCSH Total Organic Carbon Analyzer with ASI-V Auto Sampler

$3,900.00

Sold out

Contact Us to Purchase
SN H51104535248cs
Offered Shimadzu Corporation TOC-VCSH Total Organic Carbon Analyzer with 40 mL vials x 68 ASI-V Auto Sampler Complete working System.
This system tested and is in excellent condition!
The functionality for continuous automatic measurement has bee added to the ability of the combustion catalytic oxidation/NDIR TOC-V Series to perform high-performance, high sensitivity measurement of organic substances.
The On-line TOC-VCSH can be used for Continuous automatic high-sensitivity monitoring of water samples such as pure water and tap water.
Combines Combustion Catalytic Oxidation at 680°C and NDIR Method
Combustion catalytic oxidation at 680°C oxidizes even persistent or insoluble organic compounds. This method accurately measures any type of organic substance not affected by interfering substances or the sample properties such as pH or conductivity.
Easy Maintenance
Combustion catalytic oxidation at 680°C eliminates the need for oxidizing reagents, saving the tasks of procuring and preparing reagents. No special draining operations are needed.
Support Software for Pharmaceutical Water Management Applications
The On-line TOC-VCSH incorporates software for automatically performing tests specified by Japanese Pharmacopoeia (resolution test) and USP (system suitability test). Combining the On-line TOC-VCSH with an OCT-1 (optional) enables fully automatic testing; setting the reagent is all that is required.
Wide Variety of TOC Measurement Methods
NPOC, IC, TC and TOC (TC-IC) measurements are possible with the ON-LINE TOC-VCSH. TN measurement is also possible by adding an optional product. TOC and TN can be measured simultaneously.
Main Applications

Management of pharmaceutical water
Management of ultrapure and recycled water for the semiconductor industry
Management of mains water
l Impurity contamination management for all types of water used at plants (cooling water, recycled water, and boiler water)

ON-LINE TOC-VCSH - Specifications:

Measured items NPOC (TOC by IC subtraction using acid sparging), TC, IC, TOC (TC-IC), TN (optional TNM-1 required)
Measurement method 680ºC combustion catalytic oxidation/NDIR method

720ºC combustion catalytic oxidation/ chemiluminescence method
(when TNM-1 is connected)

Measurement range TC: 0-500 ìg/L to 0-25,000 mg/L variable

IC: 0-500 ìg/L to 0-30,000 mg/L variable

Measurement cycle Approx. 5 to 999 minutes (for NPOC measurement)
Number of measurement channels 1 channel
Reproducibility CV 1.5% max.
Linearity ±2% F.S. max.
Zero stability ±2% F.S. max. per day
Span stability ±2% F.S. max. per day (ambient temperature fluctuations within 5ºC)
Calibration cycle Variable in the range 1 to 999 hours
Sample injection method Automatic injection using syringe pump/slider
Sample injection volume Variable in the range 10 to 2,000 uL
Sample dilution function Diluted in syringe; dilution factor: 2 to 50
IC pretreatment Automatic acidification and sparging
Carrier gas High-purity air or oxygen (1 ppm max. of CO, CO2, or HC)

             High-purity nitrogen (1 ppm max. of CO, CO2, or HC) (when using optional nitrogen gas carrier kit)
             Supply pressure: Approx. 600 kPa
             Flow rate: 150 mL/min (230 mL/min with sparging)

Measurement value output Analog output: Select from 4 to 20mA, 0 to 16mA (insulation, load resistance: 750Ù max.), and 0 to 1VDC RS-232C: Baud rate; 9,600 bps, Data length; 8 bits, Parity; none, Stop bits; 1
Alarm output Measurement value upper limit and upper upper limit alarms, system error alarm: No-voltage contact output (maximum: 5VA, 0.1A, 50V)
Control input Remote stopping and starting of sample measurement and calibration
Sample conditions Flow rate: Approx. 0.1 to 1 L/min
Sample volume: 5 to 7 mL per measurement
Temperature: 0 to 90ºC
Ambient temperature 5 to 35ºC
Power supply AC 100 - 127V ±10% MAX 800VA 50/60 Hz

AC 200 - 240V ±10% MAX 1200VA 50/60 Hz

Dimensions Approx. 440 (W) x 560 (D) x 460 (H) mm (excluding protrusions)
Weight Approx. 40 kg

ASI-V Auto Sampler Features:

have a well-sealed septum that can be easily replaced with the screw cap.
The sampling needle is optimized for sample extraction from highly sealed vials and for sparging.
Changing analysis conditions or adding sample vials during analysis is simple. System operation and carrier gas flow can be automatically stopped on completion of measurements.
Creating multiple calibration curves and selecting the optimal curve for samples with significantly differing concentrations allows these samples to be analyzed in a single run.
Rinsing both external and internal surfaces of the sampling needle prevents carryover between samples.
Vial types: 40mL
Number of vials: 40mL X 68
Vial Septum With dedicated septum
Sample sparging OK (If the external sparging kit is used)
Dimensions Approx. (W)370 x (D)540 x (H)490mm
Weight Approx. 14 kg

Shop

Agilent Cary 8454 UV-Vis Diode Array System

$0.00

Sold out

Contact for price

BLE1900317

Shop

YSI 2950D-3 Biochemistry Analyzer

$0.00

Sold out

Contact for price

BLE2000008

Shop

Agilent 8453 Single Cuvette UV Vis Spectrophotometer with Software Loaded PC, Monitor, Keyboard and Mouse

$5,900.00

Sold out

Contact to purchase

BLE1700172

Features:

Fast results, UV-Vis spectral acquisition and analysis in less than 1 second

Excellent reproducibility, stable optics, low noise electronics, no moving parts

Simple operation, task-oriented and application software (not included), direct access to cells and cell holder

Effortless servicing, pre-aligned deuterium and tungsten lamps exchanged easily

Good laboratory practices (GLP), self-test and revisions built into the software (not included)/firmware

Pharmaceutical complianc regulated software for European and US pharmacopoeia

8 position 1cm sqaure cell holder.

Shop

Advanced Instruments 3250 Osmometer

$0.00

Sold out

Contact for price

BLE2000077

GOLD STANDARD PERFORMANCE

The Model 3250 uses a 200-250 μL sample volume, provides the best accuracy and precision of ANY osmometer. Sample test time is 2-3 minutes depending on the operating range

PROVEN RELIABILITY

The 3250 system incorporates over 50 years of applied technology and expertise in the field of osmometry and is ideal for laboratories seeking greater control, minimal downtime, and higher productivity

EASY TO USE

With features including a menu-driven display with push-button design, automatic calibration, and onboard statistical analysis, the 3250 combines world-class performance in a user friendly package

WIDE OPERATING RANGE

The Model 3250 offers the widest measurement range of any osmometer of 0-4000 mOsm. Select from 2 calibrated operating ranges depending on your sample type

VERSATILE SAMPLE PROCESSING

The 3250’s test parameters can be optimized based on the sample type, making it an ideal research osmometer for analyzing a wide variety of complex aqueous mixtures

FLEXIBLE REPORTING OPTIONS

The 3250 provides an onboard printer, optional bar code scanner, internal memory storage of test results, and the ability to connect to LIS or data management systems

Shop

Nova Biomedical Bioprofile Flex Analyzer for Sale

$0.00

Sold out

Please call for pricing

Excellent condition. Includes 30 day money back guarantee!!!!

ioProfile is a chemistry/cell viability modular instrument that measures up to 15 key cell culture attributes. By combining as many as five separate instruments into one easy-to-use instrument, BioProfile FLEX simplifies workflow and saves time, labor, and operating cost versus multiple instruments.

Applications of BioProfile FLEX include:

Monitoring the progress of bioreactor runs
Determining consumption and production of key metabolites
Identification of growth-limiting nutrients
Design of feeding strategies
Calibration of bioreactor probes
Measurement of cellular respiration
Balancing media electrolytes
Control levels of waste product.

Sample Analysis Time: 2.5 minutes (Gases only – PO2 + PCO2)4.0 minutes

(Chemistry/Gas & Osmolality)6.25 minutes

(All 15 tests)

Operating Temperature Range: 15-30°C (59-86°F)
Operating Relative Humidity Range: 20-85%
Sample Size: 1 mL (for all modules)
Sampling Options: Individual via syringe/cup
Automated batch using 20-position sampling tray
On-line, automated from up to ten bioreactors
Electrical Requirements: 90-264 VAC, 50 to 60 Hz (Universal Power Supply)
System Size: Height: 20 in (50 cm) Width: 26 in (66 cm) Depth: 20 in (50 cm)
System Weight: Analyzer: 94 lbs (42.6 kg) without reagents
Host Computer Monitor/CPU: 41.5 lbs (18.8 kg)
Safety Certifications: TUV: IEC 61010-1:2001
Quality Systems Certifications: TUV: ISO9001:2000 FDA Registered, OPC Compliant, PAT Compatible, 21 CFR Part 11 Compliant

Chemistry/Gas Module AssayMeasurement Range ResolutionMethod

Glucose 0.2–30.0 g/L*0.01g/L Biosensor
Lactate 0.2–10.0 g/L*0.01g/L Biosensor
Glutamine 0.2–12.0 mmol/L*0.01 mmol/L Biosensor
Glutamate 0.2–12.0 mmol/L*0.01 mmol/L Biosensor
Ammonium 0.2–25.0 mmol/L0.01 mmol/L Direct ISE
pH5.000–8.0000.001 Direct ISE
PCO23.0–300.0 mmHg0.1 mmHg Direct ISE
PO23.0–800.0 mmHg0.1 mmHg Clarke Electrode
Sodium 40–220 mmol/L0.1 mmol/L Direct ISE
Potassium 1.0–100.0 mmol/L0.01 mmol/L Direct ISE
Calcium 0.10–10.0 mmol/L0.01 mmol/L Direct ISE Calculated Tests:O2 Saturation; CO2 Saturation; Temp. Corrected pH, PCO2, PO2
*Ranges Reflect User Selectable 1:2 Dilution
Osmolality ModuleAssayMeasurement Range ResolutionMethod
Osmolality0–1500 mOsm/kg1 mOsm/kgFreezing PointCell Density/Viability Module AssayMeasurement Range ResolutionMethod
Cell Diameter8 – 50 μmN/A Digital Imaging
Detectable Density 50,000 – 100,000,000cells/mL**N/A Digital Imaging
Viability0 – 100%N/A Digital Imaging Phosphate Module Measurement Range 0.20-10 mmol/L
Sample Size 500 µL**Ranges Reflect User Selectable 1:2, 1:4, 1:5, 1:10 Dilution
IgG Module Measurement Range: 0.10–10.00 g/L* *Ranges Reflect User Selectable 1:2 Dilution