Centrifuges
Benchtop Centrifuges
Beckman Centrifuges
Beckman Coulter Optima Max 130,000 RPM UltraCentrifuge
Contact to Purchase
SN CMT00D05
Beckman Coulter Optima Max UltraCentrifuge 130,000 RPM, including MLA 130 Rotor.
The price including the TLA 100.3 (100,000 RPM) rotor shown in pictures.
Beckman Optima TLX Ultracentrifuge 120,000 RPM Model 361545
Contact to Purchase
Beckman Optima TLX Ultracentrifuge 120,000 RPM Model 361545 in Excellent Working and Cosmetic Condition
Optima TLX features:
- Maximum performance capabilities of 657,000 x g
- Sample volumes ranging from 0.2 mL to 5.1 mL per tube.
- System imbalance-tolerant,
- Direct vacuum-encased,
- Air-cooled drives;
- Rotor imbalance detection;
- Moisture-purging vacuum pump;
- Fixed angle rotors with a fluid-containment annulus;
- Chlorofluorocarbon-free,
- Solid-state temperature control systems;
- Automatic rotor identification;
- Programmability with up to five step changes;
- Ten selectable acceleration/deceleration rates;
- Microprocessor control.
Beckman Coulter Allegra X-15R Refrigerated Benchtop Centrifuge
Contact to purchase
BLE1900152
The Allegra® X-15R spins up-to three liters at 5,250 x g and processes up-to 148 tubes per cycle — ideal for high-throughput labs.
- Powerful built-in refrigeration system cools faster and maintains temperature even at maximum speed
- ARIES™ Smart Balance Rotor system auto-detects and corrects up-to 50 grams of imbalance to reduce mid-run interruptions, save time and extend system performance
- All rotors, covers and canisters are BioCertified* to contain potentially harmful aerosols and maintain lab safety
Allegra X-15R Benchtop Centrifuge Features
Economical versatility for blood, body fluids and cell/tissue culture processing
- Perform filtration and concentration applications, fast and slow blood component spins and microbial cell harvesting
- Save time, reduce potential for contamination and save on labware costs by centrifuging cells directly in cell culture flasks
- Save operator time and training with user-friendly display prompts and easy value entry
Ideal for high-throughput labs
- Spin up to 3L at 5,250 x g and process up to 148 tubes per cycle
- Powerful built-in refrigeration system cools faster and maintains temperature even at maximum speed
- Reduce mid-run interruptions, save time and extend system performance with the ARIES™ Smart Balance Rotor system
Compatible Aerosolve Canisters for Enhanced Safety
- A transparent design that enables you to check for broken labware
- Protection from aerosol leakage and spills from rotor buckets
- Biocontainment that has been third-party tested
- Bucket covers for 1.5 mL tubes to 750 mL bottles
- Microplate carrier covers for 96-well plate format
Cool it down
- The X-15R features a built in refrigeration system. This allows for a quick cool down and temperatures to be maintained even at maximum speeds.
Acceleration10 acceleration ratesDeceleration11 deceleration ratesTimed RunTo 99 hrs 59 mins or continuous (hold)Max Capacity Volume Range4.00|750.00|mLSpeed DisplayActual rotor speed in 10 rpm increments or in RCF (when selected)Temperature Control± 2.0|°C of set temperature
Temperature Range(s)From -10°C to +40°C in 1° increments
Beckman Coulter Allegra 25R Centrifuge with Rotor
Contact to purchase
BLE190499/BLE2000012/BLE2000012
Available
TA-10-250 Fixed Angle Rotor
S5700 Microplate Rotor
TS-5.1-500 Swinging Bucket Rotor
- Perfect for DNA – from Bacteria and Yeast Pelleting - Through Isolation and Purification to Post-Reaction CleanupHands-free operation with automatic door latch - "Cadillac Close"
- Magnetic rotor ID for precise performance
- Extremely quiet, maintenance-free brushless induction drive
- Operating temperature - from 2º C to 40º C to protect integrity of samples
- Interchangeable rotors accommodate "Cells to Wells" from 0.25 to 500 mL
- Specifications:Approximate Acceleration Time: 10 acceleration profiles
- Approximate Deceleration Time: 10 deceleration profiles
- Electrical Requirements: 60 Hz, 208 V
- Maximum Heat Dissipation into Room under Steady-State Conditions: 2.0 kW (6,824 Btu/hr)
- Noise Level 1 Meter in Front of Centrifuge: 68 dBA
- Set Speed: Actual rotor speed ± 50 rpm or equivalent RCF
- Set Temperature: -20 to +40° C in 1° C increments
- Set Time: to 9 hr 59 min or continuous (hold)
- Speed Range: to 15,000 rpm
- Temperature Control: ± 2° C of set temperature (after equilibration)
- Ambient Temperature Range: 10 to 35° C ambient
- Clearances Required: 7.6 cm (3.0 in)
- Humidity Restrictions: < 80% (noncondensing)
- Pollution Degree: 2
- Time -- Actual Display: Indicates run time remaining/(8) indicates elapsed time
- Finish: Control panel: coated polycarbonate. Housing surfaces: urethane paint.
- Ventilation Clearances Required: 7.6 cm (3 in) Sides and Rear
- Dimensions: 16X25.6X27 in
- Weight: 124.0 kg (273.4 lb)
Beckman Optima TLX Ultracentrifuge 120,000 RPM Model 361545
Sold out
Contact to Purchase
Beckman Optima TLX Ultracentrifuge 120,000 RPM Model 361545 in Excellent Working and Cosmetic Condition.
Year of Manufacture: 1996
Beckman Coulter Allegra X-22R Refrigerated Benchtop Centrifuge
Contact for price
BLE1900563
Excellent condition, tested and ready to ship. Includes 30 day money back guarantee!!!
- Height: 37 cm (14.6 in); with door open 81.3 cm (32.0 in)
- Width: 46 cm (18.1 in)
- Depth: 70.7 cm (27.8 in)
- Weight: 78 kg (172 lb)
- Approximate Acceleration Time: 10 acceleration profiles
- Approximate Deceleration Time: 10 deceleration profiles
- Electrical Requirements: 50 Hz, 230 VAC, 2.6 A; 60 Hz, 120 VAC, 6 A; 50/60 Hz, 100 VAC, 7 A
- Maximum Heat Dissipation into Room under Steady-State Conditions: 0.97 kW (3,311 Btu/hr)
- Noise Level 1 Meter in Front of Centrifuge: = 64 dBA
- Set Temperature: -20° C to +40° C in 1° C increments
- Set Time: to 9 hr 59 min or continuous (8)
- Speed Range: 0 to 15,500 rpm or equivalent RCF
- Ambient Temperature Range: 10° C to 35° C ambient
- Clearances Required: 7.6 cm (3.0 in)
- Humidity Restrictions: < 80% (noncondensing)
- Pollution Degree: 2
- Time -- Actual Display: Time remaining in run (timed run) or 8 and elapsed time (continuous run)
- Ventilation Clearances Required: 7.6 cm (3.0 in) sides
Thermo Centrifuges
Sigma 4K15 Refrigerated centrifuge with Highplate Rotor and Buckets 5" x 3.5" x 2.75" Deep
Product: Sigma 4K15 centrifuge
Manufacturer: SIGMA Laborzentrifugen GmbH
Sigma 4K15 with Highplate Rotor
Laboratory centrifuge, air-cooled, for the universal use in laboratories speed range 100 to 13 500 rpm, accuracy 1 rpm. (refrigerated version of 4-15)
Features include:
- Single-knob control with LCD-display.
- Maintenance-free brushless drive motor with exact speed pre-selection and display.
- Extremely smooth running even at maximum speed.
- 20 acceleration and deceleration curves and 10 program memory locations are available.
- Magnetic rotor identification prevents over-speeding rotor
- Available with free programming of the centrifugation parameters and 50 program memory locations as well.
- Available for use with laboratory robot.
- Available for use with cover opens via a linear drive
- Laboratory centrifuge, air-cooled, for universal use in the laboratory.
- Maintenance-free brushless drive motor with exact speed pre-selection and display.
- Speed range 100 to 15.000 rpm, accuracy 1 rpm.
- Extremely smooth running even at maximum speed.
- A microcontroller provides for pre-selection of gravitational field, speed, rotor, time and temperature (4K15).
- 20 acceleration and deceleration curves and 10 program memory locations are available.
- Magnetic rotor identification prevents over-speeding of rotors.
- Produced according to national and international safety regulations (IEC 1010).
- 240 V/60 Hz, 2000W, max 15,000 rpm, max capacity 2000ml
- Refrigerated table top centrifuge with built-in refrigeration system.
- Temperature control of rotors also during standstill.
Thermo Scientific Sorvall ST-16 Centrifuge with 75003629 Rotor and 75003681 Buckets
Sold out
Contact to Purchase
Sorvall Legend T Centrifuge with Optional Rotor & Buckets
Sold out
Contact to Purchase
Price with Optional Rotor & Buckets for 250ml conical tissue tube: $3,500.00
Price with Optional Rotor & Buckets 75006441: $3,800.00
Price with Optional Rotor & Buckets (2) 6497 896 and (2) 7500644: $3,700.00
SN 40240714
LEGEND T CENTRIFUGE FEATURES:
• Spin up to 80 tubes per hour at 80% higher speeds—more than twice the capacity of 3L centrifuges
• Process up to 16 microplates and multiple T-75 and T-25 flasks
• Enjoy fast and easy operation with EASYset soft-touch keypad
• Speeds up to 15,000rpm, RCFs to 21,890xG (limited by rotor spec)
• Quiet, maintenance-free brushless drive
• Low profile for easy loading and unloading
• SMARTspin imbalance detection and automatic rotor recognition
Kendro Heraeus Multifuge 3 S-R Refrigerated Centrifuge
Sold out
Contact to Purchase
SN 40446280
- System offers intuitive control panel and digital display.
- Detailed operation information, including display of set and actual parameters, maximize run performance and temperature accuracy for improved sample protection.
- User can easily adjust speed, time and temperature, even during the run, with convenient keyboard for direct input.
- Innovative lid locking technology enables one finger downward motion for easiest closing and locking of centrifuge lid, even on tall benches with optional automatic lid opening.
- Double temperature management system displays the air temperature in the chamber as well as the sample temperature, ensuring accurate control of the sample temperature during the run.
Thermo Fisher Scientific Heraeus Multifuge X3R Centrifuge (Cat No 75004516)
Sold out
BLE1900012
Contact to purchase
Rotor is SOLD SEPARATELY!
Capacity 4 x 1000mL
Max. RCF 25,314 x g
Max. Speed 15,200rpm
Refrigerated Yes
Display Digital
Height (English) Exterior 14.2 in.
Height (English) Open Cover 34.5 in.
Height (Metric) Exterior 36cm
Height (Metric) Open Cover 90cm
Length (English) Exterior 26.4 in.
Length (Metric) Exterior 67cm
Width (English) Exterior 29.3 in.
Width (Metric) Exterior 74.5cm
Certifications/Compliance IVD compliant; IEC 61010-1, IEC 61010-2-020, IEC 61010-2-101; 230V models meet EN 292, EN 61326, EN 55011B. UL, CE, CSA, Certified Biosafety
Description Heraeus Multifuge X3R Centrifuge
Electrical Requirements 120V 60Hz
Controller Type Microprocessor
Dimensions (HWD) 14.2 x 29.3 x 26.4 in. (36 x 74.5 x 67cm)
Drive System Direct, brushless induction, low-profile
Net Weight 255.7 lb. (116kg)
Program Storage 99 programs (5 with direct access key)
Run Time 99 hrs., 59 min. plus HOLD
Temperature Range -10° to +40°C
Floor Model Centrifuges
Beckman Coulter Optima L-70K Ultracentrifuge
Contact to Purchase
SN COL97K18
Centrifuge has a minor cosmetic defect, does not affect the performance of the equipment
Good working condition, tested and ready to ship. Includes 30 day money back guarantee!!!
Beckman Avanti J-HC Centrifuge with JS-4.2 Rotor
AVANTI ® J-HC A complete solution for batch bioprocessing
HIGH CAPACITY& HIGH g -FORCE
Excellent condition, tested and ready to ship. Includes 30 day money back guarantee!
- Height:86 cm (34 in); with door open 152 cm (59.9 in)
- Width:71 cm (28 in)
- Depth:86 cm (34 in); 102 cm (40.25 in) including air diverter extending from back panel
- Weight: 300 kg (660 lb)
- Approximate Acceleration Time: Maximum or slow
- Approximate Deceleration Time:Maximum, slow, timed (1 to 10 min from 500 to 0 rpm), or off
- Maximum Heat Dissipation into Room under Steady-State Conditions:2.0 kW (6,900 Btu/hr)
- Noise Level 1 Meter in Front of Centrifuge:<= 60 dBA
- Set Speed:100 to 10,000 rpm (ARIES rotors: 1000 to 10,000 rpm) in 10-rpm increments; or RCF from 200 g to maximum for the installed rotor (in 10 g increments)
- Set Temperature:-10° C to +40° C in 1° C increments
- Set Time:1 min to 99 hr 59 min (timed run), total centrifugal effect (g-seconds), or continuous (hold)
- Speed Control:actual rotor speed ±25 rpm; g force control sets speed to the nearest 50 rpm
- Temperature Control:± 2° C of set temperature (from 1,000 to 10,000 RPM)
- Ambient Temperature Range:15° C to 40° C
- Clearances Required:7.6 cm (3.0 in) sides; 16.0 cm (6.25 in) rear
- Humidity Restrictions:< 95% (noncondensing)
- Pollution Degree:2
- Rotor Chamber Diameter:58.4 cm (23 in)
- Time -- Actual Display:Indicates run time remaining (timed run), g-seconds setting and time remaining to accumulate set g seconds (g-seconds run), or elapsed time (hold run)
- Finish: Polycarbonate overlay on top surface of door; urethane paint on door edges and lower surface. Control panel: polyester with polycarbonate coating overlay
- Rotor Type:High Performance - Swinging Bucket
- Maximum Speed:4,200 rpm
- Maximum RCF at r max (g):5,020 x g
- k-Factor:11,500
- Rotor Material:Anodized Aluminum
- Bucket Material:Anodized Aluminum
- Imbalance Tolerance:10 g
- r min:114.0 mm
- r av:184.0 mm
- r max:254.0 mm
- Nominal Rotor Capacity:6 L, 6 blood bags, 18 microplates, 336 RIA tubes
- Number of Rotor Cavities x Nominal Largest Load Capacity:1 L bottle, or 1 quad pack blood
Beckman Coulter Avanti J-25I Refrigerated Centrifuge with J-21 Rotor
Contact to Purchase
SN JJY02E08
Avanti® J-25I High-Performance Centrifuge
Features at a Glance
- Bioprocessing with 4 liters a run – up to 24 liters an hour
- Faster accel/decel rates
- High-torque switch-reluctance (SR) Drive
- High force microplate applications
- Certified bioplate rotors
- Accelerated throughput, shorter run times
- Greater g-forces at 25,000 rpm and up to 75,000 x g RCF,
- Enables high force
- microplate applications up to 10 microplates in a single run
Beckman Coulter Avanti J-20 XPI Centrifuge with Optional Rotor
Contact for price
BLE1900124
Centrifuge is offered with or without picturedJLA-8.1000 rotor
Beckman Coulter Avanti J-20 XP Centrifuge with Optional Rotor
Sold out
BLE1900017
Contact for price
Centrifuge can be sold with our without picturedJLA-8.1000 rotor
The Beckman Avanti® J-20XP is a large-volume solution designed to increase laboratory throughput. This Beckman centrifuge is versatile enough to perform a wide variety of applications which require the use of DNA microplate carrier kits, elutriation systems, and other larger volume and high-speed rotors.
The Beckman Avanti® J-20XP centrifuge generates up to 26,000 rpm and 82,000 x g. The centrifuge system is the first high performance centrifuge series that can accommodate six 1-liter bottles at forces up to 16,800 x g. The J-20XP centrifuge is also compatible with 3-liter and 4-liter swinging bucket rotors, and even with rotors that can accommodate up to 24 microplates.
Speed: 100 to 26,000 rpm
Time Setting range: to 180 minutes or continuous (hold)
Time display: Indicates time remaining (timed run) or time elapsed (hold run)
Temperature setting range: –10 to +40°C (in 1°C increments)
Temp. accuracy: rotor temperature controlled to within 2°C of set temperature (after equilibration)a
Cooling fluid: refrigerant 404A (HFC)
Acceleration: maximum or slow
Deceleration: maximum, slow, or off
Beckman Avanti J-E Centrifuge
Contact to Purchase
SN JSE09G11
- Height: 91.4 cm (36 in); with door open 152.4 cm (60 in)
- Width: 63.5 cm (25 in)
- Depth: 80.0 cm (31.5 in)
- Weight: 267.4 kg (589 lb)
- Approximate Acceleration Time: Two profiles--MAX (full acceleration to set speed) and SLOW
- Approximate Deceleration Time: Three profiles--MAX, SLOW, and OFF (coast)
- Electrical Requirements: 50 Hz, 180 to 253 VAC, 24 A; 60 Hz, 187to229/216to264 VAC, 24 A
- Friction Reduction System (FRS): 190 mm (7.5 in) Hg
- Maximum Heat Dissipation into Room under Steady-State Conditions: 2.0 kW (6,900 Btu/hr)
- Noise Level 1 Meter in Front of Centrifuge: < 64 dBA
- Set Speed: Actual rotor speed ± 50 rpm of set speed
- Set Temperature: -10° C to +40° C in 1° C increments
- Set Time: to 99 hr 59 min or continuous (hold)
- Speed Range: 300 to 21,000 rpm
- Temperature Control: ± 2° C of set temperature (after equilibration)
- Ambient Temperature Range: 15° C to 35° C
- Clearances Required: 7.6 cm (3.0 in) sides; 16.0 cm (6.25 in) rear
- Humidity Restrictions: < 95% (noncondensing)
- Pollution Degree: 2
- Time -- Actual Display: Indicates run time remaining/displays elapsed time
- Finish: Control panel: silicone elastomer. Top surface: urethane paint. Other surfaces: general purpose paint.
Beckman Avanti J-E Centrifuge (Cat No 369001)
BLE1800290
Contact for Price
SN JSE04C08
- Excellent Condition. Tested and ready to ship. Includes 30 day money back guarantee!!!
- Height: 91.4 cm (36 in); with door open 152.4 cm (60 in)
- Width: 63.5 cm (25 in)
- Depth: 80.0 cm (31.5 in)
- Weight: 267.4 kg (589 lb)
- Approximate Acceleration Time: Two profiles--MAX (full acceleration to set speed) and SLOW
- Approximate Deceleration Time: Three profiles--MAX, SLOW, and OFF (coast)
- Electrical Requirements: 50 Hz, 180 to 253 VAC, 24 A; 60 Hz, 187to229/216to264 VAC, 24 A
- Friction Reduction System (FRS): 190 mm (7.5 in) Hg
- Maximum Heat Dissipation into Room under Steady-State Conditions: 2.0 kW (6,900 Btu/hr)
- Noise Level 1 Meter in Front of Centrifuge: < 64 dBA
- Set Speed: Actual rotor speed ± 50 rpm of set speed
- Set Temperature: -10° C to +40° C in 1° C increments
- Set Time: to 99 hr 59 min or continuous (hold)
- Speed Range: 300 to 21,000 rpm
- Temperature Control: ± 2° C of set temperature (after equilibration)
- Ambient Temperature Range: 15° C to 35° C
- Clearances Required: 7.6 cm (3.0 in) sides; 16.0 cm (6.25 in) rear
- Humidity Restrictions: < 95% (noncondensing)
- Pollution Degree: 2
- Time -- Actual Display: Indicates run time remaining/displays elapsed time
- Finish: Control panel: silicone elastomer. Top surface: urethane paint. Other surfaces: general purpose paint.
Beckman Coulter Avanti J-20 XP Centrifuge with Optional Rotor
BLE1900016
Contact for price
The Beckman Avanti® J-20XP is a large-volume solution designed to increase laboratory throughput. This Beckman centrifuge is versatile enough to perform a wide variety of applications which require the use of DNA microplate carrier kits, elutriation systems, and other larger volume and high-speed rotors.
The Beckman Avanti® J-20XP centrifuge generates up to 26,000 rpm and 82,000 x g. The centrifuge system is the first high performance centrifuge series that can accommodate six 1-liter bottles at forces up to 16,800 x g. The J-20XP centrifuge is also compatible with 3-liter and 4-liter swinging bucket rotors, and even with rotors that can accommodate up to 24 microplates.
Speed: 100 to 26,000 rpm
Time Setting range: to 180 minutes or continuous (hold)
Time display: Indicates time remaining (timed run) or time elapsed (hold run)
Temperature setting range: –10 to +40°C (in 1°C increments)
Temp. accuracy: rotor temperature controlled to within 2°C of set temperature (after equilibration)a
Cooling fluid: refrigerant 404A (HFC)
Acceleration: maximum or slow
Deceleration: maximum, slow, or off
Sorvall RC5B Plus Centrifuge
Contact to Purchase
Excellent Condition. Tested and ready to ship. Includes 30 day money back guarantee!!!
- Specifications
- Centrifuge Type High Speed
- Height 45 in
- Length 39 in
- Weight 680 lbs
- Width 30 in
- Maximum Speed: 21000 rpm
- Speed Range: 500 to 21000 rpm
- Speed Control Accuracy: +/- 1 percent or 100 rpm- whichever is greater
- Maximum RCF: 51070 x g
- Accel/Decel Rates: 1 acceleration, 2 deceleration
- Temperature Control Range: -20°C to +40°C
- Chamber: 16” diameter
Sorvall RC-5C Plus centrifuge with 4 Liter Rotor
Specifications
- 208V, 60 Hz, 10A, 4368 Watts
- Drive system: High-torque, direct drive DC motor; 1.86 kw (2.5hp)
- Braking system: Dynamic, electric brake
- Refrigeration system: Heavy-duty sealed compressor, 1.49kw (2hp)
- Set speed range: 50 to 21,000 rpm; increments of 10 rpm
- Speed control accuracy: ±100 rpm or 1%, whichever is greater
- Temperature set range: -200C to 400C
- Temperature control range: .20C to 400C at max. rotor speed
- Temperature control accuracy: ±10C of set temperature (after stabilization)
- Automatic rate control: acceleration control to 500 rpm; deceleration control from 700 rpm
- Timer: digital; 0 to 99 hr, 59 min for TIMED RUNS (displays remaining time); HOLD (displays elapsed time).
Sorvall RC-5C Plus Centrifuge
Contact to Purchase
SN 10202506
Specifications
- 208V, 60 Hz, 10A, 4368 Watts
- Drive system: High-torque, direct drive DC motor; 1.86 kw (2.5hp)
- Braking system: Dynamic, electric brake
- Refrigeration system: Heavy-duty sealed compressor, 1.49kw (2hp)
- Set speed range: 50 to 21,000 rpm; increments of 10 rpm
- Speed control accuracy: ±100 rpm or 1%, whichever is greater
- Temperature set range: -200C to 400C
- Temperature control range: .20C to 400C at max. rotor speed
- Temperature control accuracy: ±10C of set temperature (after stabilization)
- Automatic rate control: acceleration control to 500 rpm; deceleration control from 700 rpm
- Timer: digital; 0 to 99 hr, 59 min for TIMED RUNS (displays remaining time); HOLD (displays elapsed time).
Sorvall RC-5C Plus Centrifuge
Specifications
- 208V, 60 Hz, 10A, 4368 Watts
- Drive system: High-torque, direct drive DC motor; 1.86 kw (2.5hp)
- Braking system: Dynamic, electric brake
- Refrigeration system: Heavy-duty sealed compressor, 1.49kw (2hp)
- Set speed range: 50 to 21,000 rpm; increments of 10 rpm
- Speed control accuracy: ±100 rpm or 1%, whichever is greater
- Temperature set range: -200C to 400C
- Temperature control range: .20C to 400C at max. rotor speed
- Temperature control accuracy: ±10C of set temperature (after stabilization)
- Automatic rate control: acceleration control to 500 rpm; deceleration control from 700 rpm
- Timer: digital; 0 to 99 hr, 59 min for TIMED RUNS (displays remaining time); HOLD (displays elapsed time).
Beckman Avanti J-26XP Centrifuge with Optional Rotor
Sold out
BLE1900015
Contact for price
Fully adaptable with more than 32 rotor combinations to meet a wide range of separation needs (fixed angle and swinging bucket options ranging from 43.2 mL to 6 L capacity
Max Capacity Volume Range: 6 liters
Max Speed: 26,000 rpm
Set Temperature: -10° C to +40° C (in 1° C increments)
Set Time: 1 Min - 3 Hours, Hold
Speed Control: ± rpm of set speed or 0.1%, whichever is greater
Speed Range: 100 to 26,000 rpm or equivalent RCF; 0 to 5,000 rpm for elutriation
Temperature Control: ± 2° C of set temperature (after equilibration)
Single Tube Sample Volume Range: 1.5 - 1,000 mL
Thermo Scientific Sorvall Legend XF Centrifuge
Excellent used condition. Tested and ready to ship. Includes 30 day money back guarantee
Specifications
- Capacity 4 x 750mL
- Max. RCF4816 x G
- Hertz 60Hz
- Display Color Graphic Display
- Height (English) Open Cover 54.5 in.
- Height (Metric) Open Cover 138.5cm
- Length (Metric) Exterior 67cm
- Motor Type Direct, brushless induction, low-profile
- Timer 99 hr. 59 min. plus HOLD
- Width (Metric) Exterior 56.5cm
- Certifications/Compliance UL, CE, CSA, Certified Biosafety; IVD compliant; IEC 61010-1, IEC 61010-2-020, IEC 61010-2-101; 230V models meet EN 292, EN 61326, EN 55011 B
- Controller Type Microprocessor
- Weight (English)336.2 lb.
- Dimensions (L x W x H) Exterior 26.4 x 22.2 x 31.1 in. (67 x 56.5 x 79cm)
- Rotor Included Yes
- Max. Speed 4700rpm
- Refrigerated No
- Voltage 120V
- Height (English) Exterior 31.1 in.
- Height (Metric) Exterior 79cm
- Length (English) Exterior 26.4 in.
- Memory 99 programs (5 with direct access key)
- Safety Features Certified Click Seal biocontainment system, language selection, motorized lid latch, AutoLock III rotor locking, SMARTspin imbalance detection
- Width (English) Exterior 22.2 in.
- Ventilated Yes
- Weight (Metric)152.5 kg
- Electrical Requirements120V 60Hz
- Profile (Acceleration/Braking) 9 acceleration/10 braking
Beckman Coulter Avanti J-25I Refrigerated Centrifuge
Sold out
Contact to Purchase
BLE1900153
Pricing is for Centrifuge ONLY!
Optional Rotors available.
Avanti® J-25I High-Performance Centrifuge
Features at a Glance
- Bioprocessing with 4 liters a run – up to 24 liters an hour
- Faster accel/decel rates
- High-torque switch-reluctance (SR) Drive
- High force microplate applications
- Certified bioplate rotors
- Accelerated throughput, shorter run times
- Greater g-forces at 25,000 rpm and up to 75,000 x g RCF,
- Enables high force
- microplate applications up to 10 microplates in a single run
Thermo Scientific Sorvall RC3BP Plus Refrigerated Centrifuge
Sold out
Contact for Pricing
Excellent used condition, tested and ready to ship. Includes 30 day money back guarantee!
- Capacity 6 x 1000mL or 12 x 250mL blood bags
- Max. Speed 5,000rpm
- Max. RCF 7,277 x G
- Amperage 19A
- Height (English) Exterior 46.3 in.
- Height (Metric) Exterior 117.8cm
- Imbalance Detector 50g tolerance
- Length (English) Exterior 35.6 in.
- Length (Metric) Exterior 90.5cm
- Operational Feature Accumulated Centrifugal Effect (ACE), Step-Mode Runs, Slow Start/Stop, Security Key Switch; Electronic Self-Locking
- Run Time 1 min. to 99 min. 59 sec. plus continuous
- Safety Features Automatic lid lock, imbalance detection, steel armored guard ring
- Width (English) Exterior 31.5 in.
- Width (Metric) Exterior 80cm
- Certifications/Compliance ISO 9001:2000
- Description Sorvall RC3BP Plus Low-Speed Centrifuge
- Drive System High-performance induction
- Phase Single
- Controller Type Microprocessor
- Electrical Requirements 208 to 220V 60Hz
- Dimensions (HWD) 463 x 31.5 x 35.6 in. (117.8 x 80 x 90.5cm)
- Refrigerated Yes
- Net Weight 981 lb. (445kg)
- Temperature Range -10° to +40°C
- Recommended for:H-6000A is ideal for blood banking and general-purpose separations; holds blood bags, tubes, bottles and microplates
- HBB-6 also ideal for blood banking; holds blood, plasma and buffy-coated bags
- High-capacity HLR-6 is ideal for inline leukofiltration; optimized for FDA and AABB guidelines
Thermo Sorvall Evolution RC Superspeed Centrifuge
Sold out
Contact for Price
Excellent working condition, tested and ready to ship. Includes 30 day money back guarantee!
Evolution RC Specifications:
- Capacity: 6L
- Max. Speed: 26,000rpm
- Max. RCF: 70,450xg
- Other Features: 3 acceleration and 3 braking profiles
- Refrigerated: Yes (CFC-free system)
- Temperature: -20° to +40°C
- Motor: Brushless DC motor with gyro drive
- Heat Output: 2.5kW/8500 BTU/hr.
- Noise Level: 63dBA
- Dimensions: 42 x 28 x 51 in.; Height to top of deck: 33 in.; Depth with door open: 44 in. (105.5 x 71 x 129.5cm; Height to top of deck: 85.0cm; Depth with door open: 112.5cm)
- Net Weight: 1000 lb. (390kg)
Carr Unifuge Pilot Separations System
Sold out
Contact for Price
SN 646
Date of Manufacture - 2011
Utility Requirements
- Power Configurations: 230 VAC 50/60 Hz 1Ph 10A
- Optional: 120 VAC 50/60 Hz 1Ph 20A
- Pneumatic: 10 SCPH, 80-100 PSI 5,5-6,9 Bar
Construction
- Process Wetted Parts: USP Class VI Polycarbonate
- USP Class VI Polyurethane
- USP Class VI Silicone
- USP Class VI Bioprene
- USP Class VI C-Flex
- USP Class VI Polypropylene
- Terminally Gamma Irradiated
Dimensions
- Trolley: 24” W x 39 L” W x 46” H
- 61 cm x 99 cm x 117 cm
- Weight: 640 lbs (291kg) Total
Operating Specifications
- Feed Flow Range: 1-6 LPM
- Bowl Capacity: 1.7 liters
- G-Force: 300 x g -4000 x g
Thermo Scientific Sorvall RC 6 Plus Centrifuge
Sold out
Contact for Price
SN 2007A1643
- Capacity 4 x 1000mL (4L), 200 to 240V
- Max. Speed: 22,000rpm
- Maximum Force: 55200 x G
- Motor Type: Brushless high frequency
- Metric Capacity: 4L (4 x 1000mL)
- Metric Temperature Range: -20° to +40°C
- Timer: 0 to 99 hr. 59 min. plus HOLD
- Certifications: CE and CSA certified
- Amperage: 30A
- Hertz: 50/60Hz
- Depth: 29.6 in. (26.9 in. depth without rear duct)
- Exterior Width: 32.8 in.
- Exterior Height: 44.5 in.
- Column Phase: single
- Refrigerated: Yes
Micro Centrifuges
Beckman Coulter Microfuge 18 Centrifuge
Fast - Powerful g-Force for Fast and Optimal Pelleting
- Maintenance-free rotor spins up to 14,000 rpm (18,000 x g)
- Ideal for fast pelleting of DNA, RNA and proteins, and cell virus isolation
- Fits on crowded bench or in a cold room
- Comes complete with a 24-place autoclavable fixed-angle rotor with snap-on lid
- Quiet operation — < 58 dBa
- Soft start/stop
- Easy-to-read interface displays both speed (rpm) and force (rcf)
- Runtime options - timed, hold or pulse
- Easy-to-use knobs
Overview:
- Maintenance-free rotor spins up to 14,000 rpm (18,000 x g)
- Ideal for fast pelleting of DNA, RNA and proteins, and cell virus isolation
- Fits on crowded bench or in a cold room
- Comes complete with a 24-place autoclavable fixed-angle rotor with snap-on lid
- Quiet operation — < 58 dBa
- Soft start/stop
- Easy-to-read interface displays both speed (rpm) and force (rcf)
- Runtime options - timed, hold or pulse
- Easy-to-use knobs
Specifications
- Height: 24.5 cm (9.7 in); with door open 39.5 cm (15.6 in)
- Width: 24.0 cm (9.5 in)
- Depth: 32.0 cm (12.6 in)
- Weight: 13.0 kg (28.7 lb)
- Approximate Acceleration Time: 18 seconds to max speed
- Approximate Deceleration Time: 19 seconds from max speed
- Electrical Requirements: 50 Hz, 230 VAC, 2 A; 50/60 Hz, 100 to 120 VAC, 4 A
- Maximum Heat Dissipation into Room under Steady-State Conditions: 50 W (170 Btu/hr)
- Noise Level 1 Meter in Front of Centrifuge: 58 dBA
- Set Time: 0 to 30 min, continuous run (8), or pulse (short run)
- Speed Range: 0 to 14,000 rpm
- Ambient Temperature Range: 4 to 35°C ambient
- Clearances Required: 7.6 cm (3.0 in)
- Humidity Restrictions: < 80% (noncondensing)
- Pollution Degree: 2
- Ventilation Clearances Required: 7.6 cm (3.0 in) Sides and Rear
- Rotor: F241.5P Rotor, Sealed Lid, 24 x 2.0 mL, 14,000 rpm, 17,500 x g
Eppendorf 5415D Centrifuge
BLE1900033
Maximum Speed
Variable speed up to 13,200 rpm
Maximum g –Force (RCF)
16,110 x g
Maximum capacity
Rotor: 24 x 1.5ml tubes
Acceleration Time
< 15 sec
Deceleration Time
< 13 sec
Digital Timer
Up to 30 minutes
Dimensions (H x D x W)
230 x 310 x 230 mm
Power
110-115 volt 60Hz
Click 'buy now' through our site to checkout with free shipping! We accept major credit cards.
Sold items
Please inquire about others in stock; We get daily shipments
|
Fisher Scientific accuspin 3 centrifuge with Rotor and swing buckets
Fisher Scientific accuspin 3 centrifuge with Ch. 006368 rotor #4393 and 4x swing round buckets # 75004394. SOLD |
Beckman Allegra 25R Refrigerated Centrifuge and rotors
Beckman Refrigerated Centrifuge Allegra 25R in Excellent Working and cosmetic condition. SOLD |
|
|
Beckman Avanti J-26 XPI Centrifuge comes with Beckman JA-25.50 Rotor
SOLD |
