Histology
Leica CV5030 Automated Coverslipper and ST5020 Multistainer Workstation
Contact for price
BLE2000229/BLE2000230
The Leica CV5030 fully automated glass coverslipper produces slides with superior optical quality for reliable long-term storage.
Its capability of handling a large variety of slide racks from different suppliers makes the Leica CV5030 very flexible. Most common mounting media, including xylene-free varieties, can be used.
The operator can choose wet or dry coverslipping. The CV5030’s performance achieves three goals: Highly consistent and reliable coverslipping quality, full adaptation to individual laboratory set-ups, integration into staining/coverslipping workstations to form a fully automated, user-friendly operation system.
The Leica ST5020 Multistainer produces consistent, high-quality results for both routine and special stains and can perform single or multiple protocols at the same time.
Consistent Quality and Convenience
The Leica ST5020 reagent management system (RMS) helps to monitor reagent expiration, reagent rotation and stain quality. As a result: Reagent changes minimize disruptions to workflow and reduce delays.
Patented CodeRack technology automatically selects the staining protocol and starts the run when a rack of slides is loaded. This ensures correct program selection.
The RMS in conjunction with validated Surgipath reagents and protocols, e.g. Leica ST Infinity H&E Staining System, ensures superior staining and coverslipping quality.
Leica TP1020 Variant 11 Benchtop Tissue Processor with Vacuum and Fume Control
Contact for price
BLE2000296
Leica TP1020 Variant 11 Benchtop Tissue Processor with Vacuum and Fume Control
Includes:
Variant 11
One basket operation/standard tissue basket. With vacuum, fume control system and accessories.
1 Basic instrument 14 91020 US02
10 Aluminum reagent containers for vacuum 14 0422 4254510
Reagent container carriers 14 0422 42545
2 Wax baths, (1.8 liters) 14 0422 30665
1 Standard tissue basket 14 0422 30585
1 Tubing band clamp 14 0422 31973
1 Activated carbon filter - Standard 14 0422 30673
1 Activated carbon filter for formaldehyde 14 0422 30674
1 Exhaust hose, diameter 50 mm, 4 m long 14 0422 31975
Specifications:
Carousel lid 820 mm Ø
Height 595 - 780 mm
Diameter of rollers 610 mm
Dry weight (including accessories)60 kg
Wax baths 2 (3 optional)
Wax baths capacity 1.8 Liters
Wax baths temperature range 45 °C - 65 °
Standard tissue basket capacity max 100 cassettes
Nominal voltage 100/120/230/240 V AC ± 10%
Nominal frequency 50/60 Hz
Excess temperature cutout 75 °C ± 4 °C
Reagent containers 10 (9)
Reagent container capacity 1.8 liters
Standard tissue baskets 1 (2 optional)
Programs 9, freely selectable
Programmable infiltration time per station 99 h 59 min
Delayed start 9 days
Drain time 60 s
Vacuum device pressure difference max 500 hPa (approx. 0.5 bar)
Leica RM 2155 Microtome with Footswitch
Contact for price
BLE1900536
The Leica RM 2155 Rotary Microtome was developed for fully motorized sectioning of paraffin and plastic embedded specimens. It’s clearly structured work sequences, high user-friendliness and intelligent detail solutions combine for the perfect interaction between technology and ergonomics.
- Type Rotary microtome
- Section Thickness Setting 0.5 - 60 μm
From 0.5 to 1 μm in 0.5 μm increment
From 1 to 20 μm in 1 μm increment
From 20 to 60 μm in 5 μm increments
- Horizontal Specimen Feed 27 mm via step motor
- Max. Sectioning Area without Retraction 65 mm without specimen orientation
- Max. Sectioning Area with Retraction 60 mm
- Specimen Retraction Manual 5, 10, 15, 20 μm, can be deactivated
- N/S Repositioning of Knife Holder Base ± 25 mm
- E/W Repositioning of Knife Holder Base ± 20 mm
- Max. Specimen Size (W x H x D) 50 x 60 x 40 mm
- Specimen Orientation Horizontal 8°
- Specimen Orientation Vertical 8°
- Rotation ± 90°
- Trimming steps 5, 15, 30 μm
- Electric coarse feed 900 μm/s
- Sectioning Motor
- Sectioning speed 0; 0.5 - 420 mm/s
- Return speed Approx. 120 - 420 mm/s
- Dimensions & Weight
- Width (including Handwheel) 400 mm
- Width (excluding Handwheel) 300 mm
- Depth 550 mm
- Overall Height 290 mm
- Working Height (Knife Edge) 100 mm
- Net Weight 44.2 kg
Leica RM2235 Microtome
Contact for price
BLE2000102
Technical Specifications:
- Section thickness setting: 1.0 – 60 µm
- 1 to 10 µm in 1 µm increments
- 10 to 20 µm in 2 µm increments
- 20 to 60 µm in 5 µm increments
- Specimen retraction: approx. 40 µm, can be deactivated
- Vertical stroke: 70 mm
- Trim settings: 10 µm, 30 µm
- Horizontal specimen feed: approx. 30 mm / 1.18 inches
- Vertical stroke: 70 mm / 2.76 inches
- Maximum specimen size: 45 x 50 mm / 1.77 x 1.97 inches
Leica Bond III Automated IHC and ISH Stainer
Contact for price
BLE2100044
DIMENSIONS & WEIGHT
Dimensions (W x H x D):790 mm x 1378 mm x 806 mm
(31.1 x 54.25 x 31.73 in)
Weight (Dry):238 kg (525 lbs)
ELECTRICAL
Operating Voltage (older-model power supply; one fan in back cover):103.4 V to 127.2 V (for nominal voltage 110 V to 120 V)
Power Consumption:1200 VA
Operating Voltage (newer-model power supply; two fans in back cover):90 V to 264 V (for nominal voltage 100 V to 240 V)
Mains Frequency:50/60 Hz
ENVIRONMENTAL (UNPACKED INSTRUMENTS)
Maximum Operating Temperature:35°C (95°F)
Minimum Operating Temperature:5°C (41°F)
Temperature Required to meet Staining Performance Requirements:18–26°C (64–79°F)
Maximum Heating Energy Output:1200W/1000W
Operating Humidity (Non-Condensing):30 to 80% RH
Maximum Operating Altitude:0 to 1600 m (5250 ft.) above sea level
Sound Pressure Level Output (at 1 m):< 85 dBA maximum
< 65 dBA normal operation
OPERATING
Slide Capacity:30
Finished trays (10 slides) may be replaced continuously
Number of Reagent Containers:36
Reagent Container Capacity:7 mL and 30 mL
Titration Container Capacity:6 mL
Bulk Reagent Container Capacity:2 L or 5 L
Hazardous Waste Container Capacity:5 L
Standard Waste Container Capacity:2 x 5 L
Chemical Compatibility:All BOND Reagents
70% Alcohol Solution (for cleaning purposes)
Temperature Indication:Defaults (these can be changed by service representatives): Warm: 35°C, Hot: 80°C
Maximum permitted pressure for gas and liquid connections:1.0 bar
MICROSCOPE SLIDES
Slide Width:24.64–26.0 mm (0.97–1.02 in)
Slide Length:74.9–76.0 mm (2.95–2.99 in)
Slide Thickness:0.8–1.3 mm (0.03–0.05 in)
Label Area Width:24.64–26.0 mm (0.97–1.02 in)
Label Area Length:16.9–21.0 mm (0.67–0.83 in)
Material:Glass, ISO 8037/1
Leica RM 2155 Microtome with Footswitch
Sold out
Contact for price
BLE1900534
The Leica RM 2155 Rotary Microtome was developed for fully motorized sectioning of paraffin and plastic embedded specimens. It’s clearly structured work sequences, high user-friendliness and intelligent detail solutions combine for the perfect interaction between technology and ergonomics.
- Type Rotary microtome
- Section Thickness Setting 0.5 - 60 μm
From 0.5 to 1 μm in 0.5 μm increment
From 1 to 20 μm in 1 μm increment
From 20 to 60 μm in 5 μm increments
- Horizontal Specimen Feed 27 mm via step motor
- Max. Sectioning Area without Retraction 65 mm without specimen orientation
- Max. Sectioning Area with Retraction 60 mm
- Specimen Retraction Manual 5, 10, 15, 20 μm, can be deactivated
- N/S Repositioning of Knife Holder Base ± 25 mm
- E/W Repositioning of Knife Holder Base ± 20 mm
- Max. Specimen Size (W x H x D) 50 x 60 x 40 mm
- Specimen Orientation Horizontal 8°
- Specimen Orientation Vertical 8°
- Rotation ± 90°
- Trimming steps 5, 15, 30 μm
- Electric coarse feed 900 μm/s
- Sectioning Motor
- Sectioning speed 0; 0.5 - 420 mm/s
- Return speed Approx. 120 - 420 mm/s
- Dimensions & Weight
- Width (including Handwheel) 400 mm
- Width (excluding Handwheel) 300 mm
- Depth 550 mm
- Overall Height 290 mm
- Working Height (Knife Edge) 100 mm
- Net Weight 44.2 kg
Thermo Shandon Finesse ME Motorized Electronic Microtome
Sold out
Contact to purchase
BLE130225
Click 'buy now' through our site to checkout! We accept major credit cards
Leica RM 2155 Microtome
Sold out
Contact for price
BLE1900446
The Leica RM 2155 Rotary Microtome was developed for fully motorized sectioning of paraffin and plastic embedded specimens. It’s clearly structured work sequences, high user-friendliness and intelligent detail solutions combine for the perfect interaction between technology and ergonomics.
- Type Rotary microtome
- Section Thickness Setting 0.5 - 60 μm
From 0.5 to 1 μm in 0.5 μm increment
From 1 to 20 μm in 1 μm increment
From 20 to 60 μm in 5 μm increments
- Horizontal Specimen Feed 27 mm via step motor
- Max. Sectioning Area without Retraction 65 mm without specimen orientation
- Max. Sectioning Area with Retraction 60 mm
- Specimen Retraction Manual 5, 10, 15, 20 μm, can be deactivated
- N/S Repositioning of Knife Holder Base ± 25 mm
- E/W Repositioning of Knife Holder Base ± 20 mm
- Max. Specimen Size (W x H x D) 50 x 60 x 40 mm
- Specimen Orientation Horizontal 8°
- Specimen Orientation Vertical 8°
- Rotation ± 90°
- Trimming steps 5, 15, 30 μm
- Electric coarse feed 900 μm/s
- Sectioning Motor
- Sectioning speed 0; 0.5 - 420 mm/s
- Return speed Approx. 120 - 420 mm/s
- Dimensions & Weight
- Width (including Handwheel) 400 mm
- Width (excluding Handwheel) 300 mm
- Depth 550 mm
- Overall Height 290 mm
- Working Height (Knife Edge) 100 mm
- Net Weight 44.2 kg
Click 'buy now' through our site to checkout! We accept major credit cards.