PUMPS
Free US shipping on all items under $3000 shown below when purchasing online!
Watson Marlow 101U/R Peristaltic Pump low flow small variable speed LC for Sale
BLE1601159
100-230V 50/60Hz 15W 1-32rpm
Watson Marlow 101 U/R Low flow single-channel range peristaltic pump with adjustable number of revolutions in excellent condition
Specifications
- Frequency: 50/60Hz
- Voltage: 100 to 120, 230V
- Electrical supply: 100-230V 50/60Hz 15W
- Mass, kg: 2.4
- Flow: up to 53 ml/min at 32 rpm and 3,25 ml/min at 2 rpm
- 100-230V 50/60Hz
Click 'buy now' through our site to checkout with free shipping! We accept major credit cards.
New in Box Watson Marlow 120F/DV Pump for Sale
New in Box
BLE1601038
SN M011781
Excellent condition, tested and ready to ship. Includes 30 day money back guarantee!
The Watson-Marlow 120U/DV 120S/DV and 120F/DV, comprise a 114DV flip-top pumphead powered by a 120 fixed speed, variable speed or automatic drive. The pumphead accepts 1.6mm wall thickness tubing in a choice of five materials in sizes from 0.5 to 4.8mm internal diameter. The flip-top loading mechanism allows tube loading in seconds. The pumps give flow rates up to 170 ml/min.
- 120F: 52 rpm.
- Flow rates 0.001 to 170 ml/min at 2 bar (30psi)
Compact footprint requires minimal benchtop space
Superior speed control up to 2,000:1, ±1% set speed accuracy, repeatable flow
114DV single-channel, flip-top pumphead accepts continuous tubing only
Efficient and intuitive to use, requiring minimal key presses
Smooth, wipedown case with no sharp edges to tear gloves and no bug traps. IP31 ingress protection
Click 'buy now' through our site to checkout with free shipping! We accept major credit cards.
Watson Marlow 120S DM2 Pump
BLE1700037
Storage Requirements (English) -13 to 149°F
Storage Requirements (Metric) -25 to 65°C
Control Type Manual
Temperature Range (Metric) 5 to 40°C
IP Rating 31
Max. Torque 0.4nm
Power Supply 24VDC
Noise Level <60dBA
Channels 2
Model 120S/DM2
Enclosure Rating (Nema / IP) IP31/NEMA 2, Wipedown enclosure
Display Digital
Reversible Yes
Voltage 90/264VAC
Hertz 47/63Hz
Flow Rate 0.001 to 36mL/min.
Height (English) 4.4 in.
Height (Metric)11.2cm
Length (English) 8.1 in.
Length (Metric) 20.6cm
Width (English) 4.29 in.
Max. Pressure 30psi
Temperature Range (English) 40 to 140°F
Certifications/Compliance CE, cETLus
Electrical Requirements 90/264VAC 47/63Hz
Motor Type Brushless DC
Click 'buy now' through our site to checkout with free shipping! We accept major credit cards.
Watson Marlow 323E/D Pump for Sale
BLE150029/BLE150163/BLE1800123
All models
•Brushless d.c. drive and precision gearbox
•Flip top single channel 313D pumphead accepts five tube sizes. Can be extended to maximum six channels
•MemoDose single shot dosing, reversible flow, keypad lock and automatic restart for mains failure recovery
•Dual voltage 100/120V to 220/240V
323E/D manual control variable speed pump
•Digital speed control 15 to 400rpm in 5rpm steps
•Reversible flow direction
•Digital TTL or remote switch inputs for run/stop and direction
•Rear panel 25D socket accepts 4 to 20mA, 0 to 10V analogue auto-control input signal for speed control
Click 'buy now' through our site to checkout with free shipping! We accept major credit cards.
Watson Marlow 323S Pump with 318MC five channel micro pumphead
Free shipping available
BLE1900569
- Flow rate: 0.06 to 2200 ml/min.
- Motor speed. 1-220 rpm
- Head: 501RL2 for 2.4 mm WT tube, suitable for tubing with internal diameters up 8.0 mm
The higher performance drives can be fitted with the 501RL high-flow pumphead for single channel flow rates up to 2200 ml/min, or 314MC four-roller or 318MC eight-roller multi-channel pumpheads for up to ten channels of flow at up to 53 ml/min.
Click 'buy now' through our site to checkout with free shipping! We accept major credit cards
Watson Marlow 520Din Peristaltic Pump with 505L Pumphead for Sale
BLE160567
SN I050269
Feature
- Accuracy to ± 0.1 percent or better
- Dispenses 100ml in less than 1.4 seconds
- Dial-up flow rates from 4 microliters/min to 4.4 liter/min
- Single or twin channel flows
- Non-drip function eliminates drips at dose end
- RS485 control via serial communications
- Store up to 50 dispensing programs
- A simple security protection code protects set functions and a comprehensive security protection can be incorporated to protect dispensing parameters and calibration values.
505L pumphead
505L pumpheads feature twin offset tracks to provide pulse-free flow up to 4.4 liter/min.
The 505L pumphead has low inertia stainless steel rollers and twin offset tracks to provide smooth flows using double tube elements, or two individual tubes up to 9.6mm bore with 2.4mm wall thickness. A 505LX extension pumphead can be fitted to provide one additional channel of flow through a double tube element or four separate channels of flow.
Contact us or click 'buy now' to checkout. We accept major credit cards.
Watson Marlow 520Di Pump with 505L Pumphead
Click 'buy now' through our site to checkout! We accept major credit cards
BLE1900283
Feature
- Accuracy to ± 0.1 percent or better
- Dispenses 100ml in less than 1.4 seconds
- Dial-up flow rates from 4 microliters/min to 4.4 liter/min
- Single or twin channel flows
- Non-drip function eliminates drips at dose end
- RS485 control via serial communications
- Store up to 50 dispensing programs
- A simple security protection code protects set functions and a comprehensive security protection can be incorporated to protect dispensing parameters and calibration values.
505L pumphead
505L pumpheads feature twin offset tracks to provide pulse-free flow up to 4.4 liter/min.
The 505L pumphead has low inertia stainless steel rollers and twin offset tracks to provide smooth flows using double tube elements, or two individual tubes up to 9.6mm bore with 2.4mm wall thickness. A 505LX extension pumphead can be fitted to provide one additional channel of flow through a double tube element or four separate channels of flow.
Contact us or click 'buy now' to checkout. We accept major credit cards.
Watson Marlow 520DuN\L Peristaltic Pump with 505L Pumphead for Sale
BLE1800214
Excellent like new condition, tested and ready to ship. Includes 30 day money back guarantee!!!
Manual/ more information can be found here.
Contact us or click 'buy now' to checkout. We accept major credit cards.
Watson Marlow 520 UN/R2 2.4 MM Peristaltic Pump
Click 'buy now' through our site to checkout with free shipping! We accept major credit cards.
BLE1900359
Control range (turndown ratio) 0.1-220rpm (2200:1)
Supply voltage/frequency 100-120V/200-240V 50/60Hz 1ph
Maximum voltage fluctuation ±10% of nominal voltage. A well regulated electrical mains supply is required along with cable connections to the best practice of noise immunity Installation category (overvoltage category) II
Power consumption 135VA Full load current <0.6A at 230V; <1.25A at 115V
Eprom version Accessible through pump software
Enclosure rating IP66 to BS EN 60529; NEMA 4X to NEMA 250 *
Operating temperature range 5C to 40C, 41F to 104F Storage temperature range -40C to 70C, -40F to 158F Maximum altitude 2,000m, 6,560ft Humidity (non-condensing) 80% up to 31C, 88F, decreasing linearly to 50% at 40C, 104F Pollution degree 2 Noise <70dB(A) at 1m
Contact Us or Click 'buy now' to checkout. We accept major credit cards.
Watson Marlow 520S Peristaltic Pump with 505L Pumphead
BLE1800413
- Control range (turndown ratio) 0.1-220rpm (2200:1)
- Supply voltage/frequency 100-120V/200-240V 50/60Hz 1ph
- Maximum voltage fluctuation ±10% of nominal voltage. A well regulated electrical mains supply is required along with cable connections to the best practice of noise immunity
- Installation category (overvoltage category) II
- Power consumption 135VA
- Full load current <0.6A at 230V; <1.25A at 115V
- Eprom version Accessible through pump software
- Enclosure rating IP31 to BS EN 60529. Equivalent to NEMA 2, suiable for indoor use. Protected against dripping water and falling dirt. May be wiped with a damp cloth, but should not be immersed
- Operating temperature range 5C to 40C, 41F to 104F
- Storage temperature range -40C to 70C, -40F to 158F
- Maximum altitude 2,000m, 6,560ft
- Humidity (non-condensing) 80% up to 31C, 88F, decreasing linearly to 50% at 40C, 104F
- Pollution degree 2
- Noise <70dB(A) at 1m
Manual/ more information can be found here: http://www.watson-marlow.com/Documents/knowledge-hub/Manuals/gb%20-%20UK/m-520s-ip31-gb-05.pdf
Click 'buy now' through our site to checkout! We accept major credit cards.
NEW In Original Box Watson Marlow 530 BPN/R2 IP66 Peristaltic Pump
New In Original BoxWatson Marlow 530 BPN/R2 IP66 Peristaltic Pump
Contact Us or Click 'buy now' to checkout. We accept major credit cards.
Watson Marlow 520UN/R NEMA 4X Peristaltic Pump
Free shipping available
BLE1900436/BLE1900433/BLE1900437/BLE1900441
Control range (turndown ratio) 0.1-220rpm (2200:1)
Supply voltage/frequency 100-120V/200-240V 50/60Hz 1ph
Maximum voltage fluctuation ±10% of nominal voltage. A well regulated electrical mains supply is required along with cable connections to the best practice of noise immunity Installation category (overvoltage category) II
Power consumption 135VA Full load current <0.6A at 230V; <1.25A at 115V
Eprom version Accessible through pump software
Enclosure rating IP66 to BS EN 60529; NEMA 4X to NEMA 250 *
Operating temperature range 5C to 40C, 41F to 104F Storage temperature range -40C to 70C, -40F to 158F Maximum altitude 2,000m, 6,560ft Humidity (non-condensing) 80% up to 31C, 88F, decreasing linearly to 50% at 40C, 104F Pollution degree 2 Noise <70dB(A) at 1m
Click 'buy now' through our site to checkout with free shipping! We accept major credit cards
Watson Marlow 520DU REM Peristaltic Pump
Sold out
BLE1800293
- Flow rates up to 55.5 gph at 30 psi peak pressure with 520 LoadSure elements
- 520REL pumphead features large swept volume with sprung rollers for high accuracy
- Brushless motor, 2200:1 turndown, 0.1% set speed accuracy
- Large speed/flow display and easy to use tactile membrane keypad. Incorporates keypad lock
- Manual control with comprehensive flow rate calibration by volume or weight
- Value for life:the lowest cost of ownership
- Inputs: Analog 0-10V / 4-20mA software configurable and calibrated
- Speed scaling by keypad or second analog input for drop in replacement of diaphragm pumps
- Inputs: 4 pump status inputs all accepting 5V TTL or 24V industrial logic
- RS232 network control of up to 32 pumps
- Outputs: 4 relay outputs, up to 30V and 30W, user configured
- Outputs: 0-10V, 4-20mA analog or 0-1258Hz speed indication output
- Run time counter for enhanced process monitoring
- Dual voltage, 115V/230V 50/60Hz and 24 hour duty rated
Click 'buy now' through our site to checkout with free shipping! We accept major credit cards.
NEW IN BOX! Watson Marlow 520DU/R IP31 Peristaltic Pump
Sold out
NEW IN BOX! Watson Marlow 520DU/R IP31 Peristaltic Pump
BLE1800302/BLE180335
Model
520Du/R
Motor Speed 0.1 to 220rpm
Display Type Digital Color Display
Pump Head Single and multi-channel pump head options.
Flow Rate 0.004 to 2.4L/min
Description Continuous tubing
External Control Manual and remote
- Peristaltic pumps capable of handling flows from 0.6μl/min. to 8,000 liter/hour and handling pressures of up to 7 bar (100psi)
- Fixed and mechanically or electronically variable speed drives including ATEX versions
- LoadSure™ elements ensure correct tube loading
- Accurate and repeatable flow rates
- Contamination-free pumping
- Easy to install, operate and maintain
- Virtually maintenance-free: no expensive seals, valves, diaphragms or rotors to leak, clog or corrode
Click 'buy now' through our site to checkout with free shipping! We accept credit card through Paypal.
Watson Marlow 520U IP31 Peristaltic Pump
Sold out
BLE1800318
- Control range (turndown ratio) 0.1-220rpm (2200:1)
- Supply voltage/frequency 100-120V/200-240V 50/60Hz 1ph
- Maximum voltage fluctuation ±10% of nominal voltage. A well regulated electrical mains supply is required along with cable connections to the best practice of noise immunity Installation category (overvoltage category) II
- Power consumption 135VA Full load current <0.6A at 230V; <1.25A at 115V
- Eprom version Accessible through pump software
- Enclosure rating IP31 to BS EN 60529. Equivalent to NEMA 2, suiable for indoor use. Protected against dripping water and falling dirt. May be wiped with a damp cloth, but should not be immersed *
- Pumphead options 520R, 501RL, 313, 314, 505L, 505BA, 505CA, 314MC, 318MC
- Operating temperature range 5C to 40C, 41F to 104F
- Storage temperature range -40C to 70C, -40F to 158F
- Maximum altitude 2,000m, 6,560ft
- Humidity (non-condensing) 80% up to 31C, 88F, decreasing linearly to 50% at 40C, 104F
- Pollution degree 2
- Noise <70dB(A) at 1m
Click 'buy now' through our site to checkout with free shipping! We accept major credit cards.
Watson Marlow 520 SR Peristaltic Pump with 205CA8 8 Channel Roller
Sold out
Free shipping available.
BLE1900286
Click 'buy now' through our site to checkout with free shipping! We accept major credit cards.
Watson Marlow 530 U Peristaltic Pump with 505L Twin Pumphead
Sold out
Contact for price
BLE1900354
Watson Marlow 520U REH Nema 4X Peristaltic Pump for Sale
Sold out
BLE1700038
Excellent Condition. Fully tested and ready tod ship. 30 Day Money Back Guarantee!!!
4-7 Bar
60-100psi
- 520REL pumphead features large swept volume with sprung rollers for high accuracy
- Brushless motor, 2200:1 turndown, 0.1% set speed accuracy
- Large speed/flow display and easy to use tactile membrane keypad. Incorporates keypad lock
- Manual control with comprehensive flow rate calibration by volume or weight
- Value for life:the lowest cost of ownership
- Inputs: Analog 0-10V / 4-20mA software configurable and calibrated
- Speed scaling by keypad or second analog input for drop in replacement of diaphragm pumps
- Inputs: 4 pump status inputs all accepting 5V TTL or 24V industrial logic
- RS232 network control of up to 32 pumps
- Outputs: 4 relay outputs, up to 30V and 30W, user configured
- Outputs: 0-10V, 4-20mA analog or 0-1258Hz speed indication output
- Run time counter for enhanced process monitoring
- Dual voltage, 115V/230V 50/60Hz and 24 hour duty rated
Manual/ more information can be found here.
Click 'buy now' through our site to checkout with free shipping! We accept credit card through Paypal.
Watson Marlow 520S (with 520R pump head) Peristaltic Pump for Sale
Sold out
New - In Original Box
Includes 520R pump head
NEW IN BOX! Includes 30 day money back guarantee!!!
- Control range (turndown ratio) 0.1-220rpm (2200:1)
- Supply voltage/frequency 100-120V/200-240V 50/60Hz 1ph
- Maximum voltage fluctuation ±10% of nominal voltage. A well regulated electrical mains supply is required along with cable connections to the best practice of noise immunity
- Installation category (overvoltage category) II
- Power consumption 135VA
- Full load current <0.6A at 230V; <1.25A at 115V
- Eprom version Accessible through pump software
- Enclosure rating IP31 to BS EN 60529. Equivalent to NEMA 2, suiable for indoor use. Protected against dripping water and falling dirt. May be wiped with a damp cloth, but should not be immersed
- Operating temperature range 5C to 40C, 41F to 104F
- Storage temperature range -40C to 70C, -40F to 158F
- Maximum altitude 2,000m, 6,560ft
- Humidity (non-condensing) 80% up to 31C, 88F, decreasing linearly to 50% at 40C, 104F
- Pollution degree 2
- Noise <70dB(A) at 1m
Manual/ more information can be found here: http://www.watson-marlow.com/Documents/knowledge-hub/Manuals/gb%20-%20UK/m-520s-ip31-gb-05.pdf
Click 'buy now' through our site to checkout with free shipping! We accept major credit cards.
Watson Marlow 520SN/REM Peristaltic Pump for Sale
Sold out
BLE1700460
SN J090406
Excellent working condition, tested and ready to ship. Includes 30 Day Money Back Guarantee.
530S and SN, 530U and UN, 530Du and DuN, 530Bp and BpN pumps fitted with REM LoadSure tube element pumphead for 30-60psi operation
530 range of process pumps offer four drive options, color display and intuitive menu structures provide visual status indication and minimal key presses.
- Flow rates up to 24USGPH at 60psi peak pressure
- Industrial integration - manual, remote, Analog and digital communication, plus PROFIBUS
- Robust pumphead construction with chemically-resistant polyphenylene sulphide track and rotor, and stainless steel rollers and bearings
- Keypad incorporates 3-level security PIN lock
- 520REM pumphead for use with quick-release industrial or sanitary Tri-Clamp® LoadSure® elements for up to 60psi operation and one minute maintenance
- S, U, Du and Bp pumps are NEMA 2 cased pumps. SN, UN, DuN and BpN are NEMA 4X cased pumps
Manual/ more information can be found here.
Click 'buy now' through our site to checkout with free shipping! We accept major credit cards.
Watson Marlow 520DiN Nema 4X Peristaltic Pump for Sale
Sold out
BLE160568
I050271
Features
- Accuracy to ± 0.1 percent or better
- Dispenses 100ml in less than 1.4 seconds
- Dial-up flow rates from 4 microliters/min to 4.4 liter/min
- Single or twin channel flows
- Non-drip function eliminates drips at dose end
- RS485 control via serial communications
- Store up to 50 dispensing programs
- A simple security protection code protects set functions and a comprehensive security protection can be incorporated to protect dispensing parameters and calibration values.The 505L pumphead has low inertia stainless steel rollers and twin offset tracks to provide smooth flows using double tube elements, or two individual tubes up to 9.6mm bore with 2.4mm wall thickness.
Contact us or click 'buy now' to checkout. We accept major credit cards.
Watson Marlow 630BpN/RE4 Peristaltic Pump in LIKE NEW Condition
Contact to purchase
BLE1900426
Watson Marlow 620S/R Peristaltic Pump
BLE1900449
Click 'buy now' through our site to checkout! We accept major credit cards
Watson Marlow 620SN/R Peristaltic Pump
BLE1900453/BLE1900454
Click 'buy now' through our site to checkout! We accept major credit cards
Watson Marlow 620 BPN/RE Profibus Pump for Sale
BLE1700262
Like New condition. In original box ready to ship. 30 Day Money Back Guarantee!!!
Manual/ more information can be found here: http://www.watson-marlow.com/Documents/knowledge-hub/Manuals/gb%20-%20UK/m-620bpn-bp-gb-01.pdf
Contact us or click 'buy now' to checkout. We accept major credit cards.
Watson Marlow 624 U Peristaltic Pump for Sale
BLE160620/BLE1601114
SN A124872/F080061
Manual/ more information can be found here.
Click 'buy now' through our site to checkout with free shipping! We accept major credit cards.
Watson Marlow 620SN/RE 265RPM IP 166 PTFE Coated and Cased Peristaltic Pump
BLE1601019
Multiple Units available
Contact us or click 'buy now' to checkout. We accept major credit cards.
Watson Marlow 620SR Digital Peristaltic Pump
BLE1800451
Like New condition. In original box ready to ship. 30 Day Money Back Guarantee!!!
Contact us or click 'buy now' to checkout. We accept major credit cards.
Watson Marlow 620 BPN/RE Profibus Pump for Sale
Sold out
BLE1800219
SN L121057
Good working condition. Includes 30 Day Money Back Guarantee!!!
Manual/ more information can be found here: http://www.watson-marlow.com/Documents/knowledge-hub/Manuals/gb%20-%20UK/m-620bpn-bp-gb-01.pdf
Contact us or click 'buy now' to checkout. We accept major credit cards.
Watson Marlow 620Di Peristaltic Pump with 620L Pumphead for Sale
Sold out
BLE1700627
SN M111638
Good working condition, tested and ready to ship. Includes 30 day money back guarantee.
The 620Di (IP31) is a specialist dispensing pump, designed to function as an automatic, programmable dispenser able to output batch records for cGMP requirements.
- Digital network control RS232 via 9-pin D-connector (IP31)
- Accurate, fast dispensing. Dispenses 500ml in 3.5 seconds with ±0.5% accuracy
- Calibration by weight or volume, metric or US units; calibration without disturbing batch dispensing
- Dose triggered by timed interval, keypad, remote signal or additional footswitch, handswitch or proximity switch
- PIN-secure Process Protection (PPP): safeguard your process with two levels of set-up security
- Stores 50 dispensing programs
Specifications:
- Control range (turndown ratio): 0.1-265rpm (2650:1)
- Supply voltage/frequency: Filtered 100-120V/200-240V 50/60Hz 1ph
- Maximum voltage fluctuation: ±10% of nominal voltage. A well regulated electrical mains supply is required along with cable connections conforming to the best ractice of noise immunity
- Installation category (overvoltage category): II
- Power consumption: 250VA
- Full load current: <1.1A at 230V; <2.2A at 115V
- Eprom version: Accessible through pump software
- Enclosure rating: IP31 to BS EN 60529. Equivalent to NEMA 2, suitable for indoor use.
Protected against dripping water and falling dirt.
May be wiped with a damp cloth, but should not be immersed.
- Operating temperature range: 5C to 40C, 41F to 104F
- Storage temperature range: -25C to 65C, -13F to 149F
- Maximum altitude: 2,000m, 6,560ft
- Humidity (non-condensing): 80% up to 31C, 88F, decreasing , linearly to 50% at 40C, 104F
Humidity (condensing) (620DiN) 10% - 100% RH
Manual/ more information can be found here: http://www.sincaninc.com/pumps/perist/watson/600/62xdi/mnl-620din-di-gb-01.pdf
Contact us or click 'buy now' to checkout. We accept credit card through Paypal
Watson Marlow 720DUN/RE Peristaltic Pump w/Nema 4x for Sale
BLE1800158/BLE1800202
SN L081175/L081174
Watson-Marlow’s tough industrial cased pumps are a team, and they’re on your side. 520, 620 and 720, using continuous tubing or elements, cover flows from 4µ/min to 3,300 litres/hour, with high accuracy and industrial compatibility. The 720 is a powerful pump which can be fitted with one or two pumpheads: twin channels increase the flow for high-flow metering or transfer The versatile, medium-flow 620 is available with two rollers, for maximum throughput, or four rollers, for minimum pulsation.
• Flow rates to 18 litre/minute
• Pressures up to 4 bar (60 psi)
• LoadSure® elements in two sizes • Tubing in three materials and four sizes With its eight tubing sizes, the 520 range has a flow ratio of 875,000:1, giving superb control. As well as standard metering duties, the 520 offers specialist pumping such as multi-channel and minimal pulsation How to pick a winner All share the same technology, the same human-machine interface, and the same space-saving design concept. The controls are the same, allowing process scale-up and easy operator training: if you know one pump, you know them all.
• Flow rates to 3.5 litre/minute
• Three element configurations offer pressure capabilities up to 2 bar, 4 bar and 7 bar (30 psi, 60 psi, 100 psi)
• LoadSure® elements in three sizes • Tubing in three materials and eight sizes
• Flow rates to 3,300 litre/hour • Pressures up to 2 bar (30 psi)
• LoadSure® elements in four sizes
• Tubing in three materials and five sizes
Contact us or click 'buy now' to checkout. We accept major credit cards.
Watson Marlow 720SN/RE IP66 Peristaltic Pump for Sale
Free shipping available
BLE1601023/BLE1601022/BLE1700576
- 720S Pump The choice for high-flow metering or transfer
- Manual keypad control
- Five sizes of continuous tubing and elements in four sizes give optimum performance over a wide flow range
Click 'buy now' through our site to checkout with free shipping! We accept major credit cards
Watson Marlow 720SN/R Peristaltic Pump
Contact us or click 'buy now' to checkout. We accept credit card through PayPal.
Product Category
Liquid Handling Pumps
Pump Type
Dosing Pump; Injection Pump; Metering Pump; Peristaltic Pump; Positive Displacement Pump; Self-Priming Pump; Sanitary Pump
Discharge Pressure
30.0 psi (21.09 m of Water)
Liquid Flow
8.800 GPM (33.33 L/min)
Power Source
AC; 115 VAC, 230 VAC
Click 'buy now' through our site to checkout! We accept major credit cards.
Watson Marlow 704 U/R IP55 Washdown Peristaltic Pump
Free shipping available
BLE140227/BLE130276
Click 'buy now' through our site to checkout with free shipping! We accept major credit cards
Watson Marlow 720UN/R Peristaltic Pump
Sold out
BLE1800452
Watson-Marlow’s tough industrial cased pumps are a team, and they’re on your side. 520, 620 and 720, using continuous tubing or elements, cover flows from 4µ/min to 3,300 litres/hour, with high accuracy and industrial compatibility. The 720 is a powerful pump which can be fitted with one or two pumpheads: twin channels increase the flow for high-flow metering or transfer The versatile, medium-flow 620 is available with two rollers, for maximum throughput, or four rollers, for minimum pulsation. Other pumpheads are available • Flow rates to 18 litre/minute • Pressures up to 4 bar (60 psi) • LoadSure® elements in two sizes • Tubing in three materials and four sizes With its eight tubing sizes, the 520 range has a flow ratio of 875,000:1, giving superb control. As well as standard metering duties, the 520 offers specialist pumping such as multi-channel and minimal pulsation How to pick a winner All share the same technology, the same human-machine interface, and the same space-saving design concept. The controls are the same, allowing process scale-up and easy operator training: if you know one pump, you know them all. • Flow rates to 3.5 litre/minute • Three element configurations offer pressure capabilities up to 2 bar, 4 bar and 7 bar (30 psi, 60 psi, 100 psi) • LoadSure® elements in three sizes • Tubing in three materials and eight sizes • Flow rates to 3,300 litre/hour • Pressures up to 2 bar (30 psi) • LoadSure® elements in four sizes • Tubing in three materials and five sizes
Click 'buy now' through our site to checkout! We accept major credit cards.
Essen Instruments Pipeline Dispenser (Cat No 4354)
Free shipping available
BLE2000046/BLE2000047
- Dispense Speeds - 4, 6, and 8 mL/s approx.
- Programmable volumes
- 0.1 mL—99.9 mL - 0.1 mL increments
- 100 mL—9999 mL - 1.0 mL increments
- Memory - 8 user presets
- Accuracy—Typical - ± (2.0% + 0.12 mL)
- Dimensions (H x W x D) - 14” x 11.25” x 8.5” (355 x 285 x 216 mm)
- Weight - 24.5 lbs (9.15 Kg)
Click 'buy now' through our site to checkout with free shipping! We accept major credit cards.
Cohesive Technologies LC-10ADVP Micro Plunger Pump
BLE150364
SN 08381 43 00210US
The LC-10ADVP micro-plunger pump is unsurpassed for stable, pulse-free solvent delivery. It’s dual reciprocating 10µL plungers enable superior detector baseline stability and minimal baseline noise, making this pump ideally suited for high sensitivity applications including refractive index, conductivity, electrochemical, and mass spectrometer detection.
The LC-10ADVP has built-in validation functions for GLP/GMP compliance. Improved seal and plunger materials provide increased pump durability, and a standard leak sensor adds safety. Like it’s predecessor, the LC-10ADVP offers front access to seals and plungers for easy maintenance with minimal system disruption. The LC-10ADVP accomodates a wide array of applications and can be set up in isocratic, highpressure gradient, or low-pressure gradient configurations.
Features:
- Constant flow pumping;
- Flow rate setting range: 1-392 Bar at 0.001-5.00 mL/min; 1-196 Bar at 5.001-9.999 mL/min
- Flow accuracy: ±2% or ±2 uL/min, whichever is the greater
- Flow rate pressure: Within ± 0.3%
- Constant pressure pumping: Pressure setting range: 1-392 Bar
Click 'buy now' through our site to checkout with free shipping! We accept major credit cards.
Never Used - Yamada NDP-15 Series Pump for Sale
BLE1700464/BLE1700465
Never Used Condition. 30 Day Money Back Guarantee!
Air Inlet
1/4" Female NPT (includes ball valve)
Air Exhaust
3/8" Female NPT (includes silencer)
1 Polypropylene pumps may be fitted with ball or flat check valves. Ball-type check valves are recommended for flooded suction applications. Flat-type check valves are recommended for suction lift applications.
2 Kynar® and Groundable Acetal pumps are fitted with flat check valves only.
3 Aluminum and Stainless Steel pumps are fitted with ball check valves only.
Maximum Liquid Temperature
4
Diaphragm Material / Temperature
Buna N: 180°F (82°C)
Neoprene: 180°F (82°C)
Santoprene® (TPO) 180°F (82°C)
EPDM: 212°F (100°C)
PTFE 212°F (100°C)
Hytrel® (TPE) 248°F (120°C)
Viton® fluoroelastomer 248°F (120°C)
5 Polypropylene pumps have a maximum liquid temperature of 180°F (82°C) regardless of diaphragm material. Kynar® pumps have a maximum temperature of 248°F (120°C) when fitted with Hytrel® or Viton® diaphragms.
Air Supply Pressure (All Models) 20 to 100 PSI (1.4 to 7 kgf/cm²)
Discharge Volume Per Cycle 0.034 gallons (128 cc)
Maximum Cycles Per Minute 400
Maximum Size Solid 1/32" (1.0 mm)
Maximum Dry Suction Lift
Flat-type check valve: 8-feet
Ball-type check valve: 5-feet
Air Motor
Manual/ more information can be found here.
Click 'buy now' through our site to checkout with free shipping! We accept major credit cards.
Watson Marlow Sci Q 400 Peristaltic Pump for Sale
BLE1800209
Excellent condition, tested and ready to ship. Includes 30 day money back guarantee.
Manual/ more information can be found at: http://www.axflow.com/global/pumps/watson%20marlow/sci-q%20400%20series%20pumps.pdf
Click 'buy now' through our site to checkout with free shipping! We accept major credit cards.
Wilden B20H-T1 Air Pump for Sale
BLE1700466
Excellent working condition. Includes 30 day money back guarantee!
FLOW RATE TO 54.9 LPM (14.5 GPM)
MAX PRESSURE = 8.6 BAR (125 PSI)
Manual/ more information can be found here.
Click 'buy now' through our site to checkout with free shipping! We accept major credit cards.
Watson Marlow 101U/R Peristaltic Pump low flow small variable speed LC for Sale
BLE1601159
100-230V 50/60Hz 15W 1-32rpm
Watson Marlow 101 U/R Low flow single-channel range peristaltic pump with adjustable number of revolutions in excellent condition
Specifications
- Frequency: 50/60Hz
- Voltage: 100 to 120, 230V
- Electrical supply: 100-230V 50/60Hz 15W
- Mass, kg: 2.4
- Flow: up to 53 ml/min at 32 rpm and 3,25 ml/min at 2 rpm
- 100-230V 50/60Hz
Click 'buy now' through our site to checkout with free shipping! We accept major credit cards.
New in Box Watson Marlow 120F/DV Pump for Sale
New in Box
BLE1601038
SN M011781
Excellent condition, tested and ready to ship. Includes 30 day money back guarantee!
The Watson-Marlow 120U/DV 120S/DV and 120F/DV, comprise a 114DV flip-top pumphead powered by a 120 fixed speed, variable speed or automatic drive. The pumphead accepts 1.6mm wall thickness tubing in a choice of five materials in sizes from 0.5 to 4.8mm internal diameter. The flip-top loading mechanism allows tube loading in seconds. The pumps give flow rates up to 170 ml/min.
- 120F: 52 rpm.
- Flow rates 0.001 to 170 ml/min at 2 bar (30psi)
Compact footprint requires minimal benchtop space
Superior speed control up to 2,000:1, ±1% set speed accuracy, repeatable flow
114DV single-channel, flip-top pumphead accepts continuous tubing only
Efficient and intuitive to use, requiring minimal key presses
Smooth, wipedown case with no sharp edges to tear gloves and no bug traps. IP31 ingress protection
Click 'buy now' through our site to checkout with free shipping! We accept major credit cards.
Essen Instruments Pipeline Dispenser (Cat No 4355)
Sold out
Price: $1,950.00
BLE150241
SN 02005
- Dispense Speeds - 4, 6, and 8 mL/s approx.
- Programmable volumes
- 0.1 mL—99.9 mL - 0.1 mL increments
- 100 mL—9999 mL - 1.0 mL increments
- Memory - 8 user presets
- Accuracy—Typical - ± (2.0% + 0.12 mL)
- Dimensions (H x W x D) - 14” x 11.25” x 8.5” (355 x 285 x 216 mm)
- Weight - 24.5 lbs (9.15 Kg)
Click 'buy now' through our site to checkout with free shipping! We accept credit card through Paypal.
Watson Marlow 205U Peristaltic Pump with 14 Channel Cassette
Free shipping available
BLE1900531
Flow rates from 0.0006 to 22.0 ml/min
25 pin D connection for analog control
Auto/manual select through keypad
5V square wave or analog tacho output
Manual speed control
LCD display of pump speed
Remote speed control via analog signals up to 30V or 32mA or potentiometer
Auto restart and keypad lock functions
Manual control of stop/start, direction and priming via membrane keypad
Fitted with 205CA 8-roller low pulse pump head
Remote operation of stop/start and direction via contact or TTL switching
Accepts manifold tube elements, 0.13mm to 2.79mm bore
Motor running/stopped status via 5V Hi/Low signal output
Instant stops and reverse
Click 'buy now' through our site to checkout with free shipping! We accept major credit cards
Essen Instruments Pipeline Dispenser (Cat No 4354)
Free shipping available
BLE2000046/BLE2000047
- Dispense Speeds - 4, 6, and 8 mL/s approx.
- Programmable volumes
- 0.1 mL—99.9 mL - 0.1 mL increments
- 100 mL—9999 mL - 1.0 mL increments
- Memory - 8 user presets
- Accuracy—Typical - ± (2.0% + 0.12 mL)
- Dimensions (H x W x D) - 14” x 11.25” x 8.5” (355 x 285 x 216 mm)
- Weight - 24.5 lbs (9.15 Kg)
Click 'buy now' through our site to checkout with free shipping! We accept major credit cards.
Cohesive Technologies LC-10ADVP Micro Plunger Pump
BLE150364
SN 08381 43 00210US
The LC-10ADVP micro-plunger pump is unsurpassed for stable, pulse-free solvent delivery. It’s dual reciprocating 10µL plungers enable superior detector baseline stability and minimal baseline noise, making this pump ideally suited for high sensitivity applications including refractive index, conductivity, electrochemical, and mass spectrometer detection.
The LC-10ADVP has built-in validation functions for GLP/GMP compliance. Improved seal and plunger materials provide increased pump durability, and a standard leak sensor adds safety. Like it’s predecessor, the LC-10ADVP offers front access to seals and plungers for easy maintenance with minimal system disruption. The LC-10ADVP accomodates a wide array of applications and can be set up in isocratic, highpressure gradient, or low-pressure gradient configurations.
Features:
- Constant flow pumping;
- Flow rate setting range: 1-392 Bar at 0.001-5.00 mL/min; 1-196 Bar at 5.001-9.999 mL/min
- Flow accuracy: ±2% or ±2 uL/min, whichever is the greater
- Flow rate pressure: Within ± 0.3%
- Constant pressure pumping: Pressure setting range: 1-392 Bar
Click 'buy now' through our site to checkout with free shipping! We accept major credit cards.
Never Used - Yamada NDP-15 Series Pump for Sale
BLE1700464/BLE1700465
Never Used Condition. 30 Day Money Back Guarantee!
Air Inlet
1/4" Female NPT (includes ball valve)
Air Exhaust
3/8" Female NPT (includes silencer)
1 Polypropylene pumps may be fitted with ball or flat check valves. Ball-type check valves are recommended for flooded suction applications. Flat-type check valves are recommended for suction lift applications.
2 Kynar® and Groundable Acetal pumps are fitted with flat check valves only.
3 Aluminum and Stainless Steel pumps are fitted with ball check valves only.
Maximum Liquid Temperature
4
Diaphragm Material / Temperature
Buna N: 180°F (82°C)
Neoprene: 180°F (82°C)
Santoprene® (TPO) 180°F (82°C)
EPDM: 212°F (100°C)
PTFE 212°F (100°C)
Hytrel® (TPE) 248°F (120°C)
Viton® fluoroelastomer 248°F (120°C)
5 Polypropylene pumps have a maximum liquid temperature of 180°F (82°C) regardless of diaphragm material. Kynar® pumps have a maximum temperature of 248°F (120°C) when fitted with Hytrel® or Viton® diaphragms.
Air Supply Pressure (All Models) 20 to 100 PSI (1.4 to 7 kgf/cm²)
Discharge Volume Per Cycle 0.034 gallons (128 cc)
Maximum Cycles Per Minute 400
Maximum Size Solid 1/32" (1.0 mm)
Maximum Dry Suction Lift
Flat-type check valve: 8-feet
Ball-type check valve: 5-feet
Air Motor
Manual/ more information can be found here.
Click 'buy now' through our site to checkout with free shipping! We accept major credit cards.
Watson Marlow Sci Q 400 Peristaltic Pump for Sale
BLE1800209
Excellent condition, tested and ready to ship. Includes 30 day money back guarantee.
Manual/ more information can be found at: http://www.axflow.com/global/pumps/watson%20marlow/sci-q%20400%20series%20pumps.pdf
Click 'buy now' through our site to checkout with free shipping! We accept major credit cards.
Wilden B20H-T1 Air Pump for Sale
BLE1700466
Excellent working condition. Includes 30 day money back guarantee!
FLOW RATE TO 54.9 LPM (14.5 GPM)
MAX PRESSURE = 8.6 BAR (125 PSI)
Manual/ more information can be found here.
Click 'buy now' through our site to checkout with free shipping! We accept major credit cards.
In Original Box Watson Marlow QDOS-60
In Original Box Watson Marlow QDOS-60
Contact Us or click 'buy now' to checkout. We accept credit card through Paypal
Flowtech Labtop Uniblock 350 Pump
Free shipping available
BLE1900540
Port Size 1.5"
Port Connection Type triclamp
Port Orientation horizontal
Voltage Input / Max. Amp 115vac / 8.9amp 1x230vac / 4.4amp
Max. Ambient Temp 25°C (77°F)
Max. Process/CIP Temp. (ss rotors) 90°C (194°F)
Max. SIP Temp. (stand still) 135°C (275°F)
Unit Weight (ss gearbox) 47 kg (103 lbs.)
(alum. gearbox) 43 kg (93 lbs.)
Standard Pump Supplied With 316L ss rotor 316L ss shafts 316 ss rotor housing
Click 'buy now' through our site to checkout with free shipping! We accept major credit cards
FMI QD High Speed-High Flow Metering Pump
Like New Condition, In Original Packing. Includes 30 Day Money Back Guarantee
QD Features:
- No valves to clog, hang up or service
- Ceramic and fluorocarbon standard wetted materials
- One moving part - Piston
- Drift-free performance
- Flow rate infinitely adjustable from 0 to 2208 mL / min in either direction
- Convenient multi-position tilt stand for wall or counter mounting
- Rugged, long life, fan cooled, thermally protected, ball bearing motor
- UL,CE Approved
Pump Specifications:
- Dimensions: 9 3/4"x 4 3/4" x 5 3/8" (248 x 121 x 137 mm)
- Shipping weight: 10 lb (4.5 kg)
- Electrical: 115 VAC, 60Hz, 1/25 hp, single phase, 1.25 amps, 1725 rpm
- Shaded 4 pole, sparkless, Totally Enclosed, Fan-Cooled (TEFC) thermally protected motor
- 3 prong power cord
- CE Approved, motor is UL recognized
Thermo Electron FH100X (Model 72-320-100) Peristaltic Pump
SN D11001107
Excellent condition, tested and ready to ship. Includes 30 day money back guarantee!!!
- Control Type Variable-Speed Digital
- Min RPM 4
- Max RPM 400
- Number of Channels 1
- Max Flow Rate (mL/min) 4000
- Min Flow Rate (mL/min) 14
- Max Flow Rate Per Channel (mL/min) 4000
- Min Flow Rate Per Channel (mL/min) 14
- Drive Catalyst Precision Variable-Speed
- Pump Head FH100X
- Tubing sizes accepted 2.4 mm wall; 4.8, 6.4, 8.0, 9.5 mm ID
- Drive IP rating IP 31
- Duty Cycle Continuous
- Number of Rollers 3
- Power (VAC) 90 to 260
- Power (amps) 1.6A at 115v; 1.9A at 230v
- Power (Hz) 50/60
- Width (in) 11
- Height (in) 6
- Length (in) 12.5
- Width (cm) 27.9
- Height (cm) 15.2
- Length (cm) 31.8
- Open-Head Sensor Yes
- Housing Material ABS Plastic and Aluminum
- Remote Inputs 4 to 20 mA, 0 to 10 V; start/stop and direction via contact closure
- Description FH100X Peristaltic Pump for 2.4 mm Wall Tubing, 400 rpm, 115/230 V
Click 'buy now' through our site to checkout with free shipping! We accept major credit cards.
Flowtech Uniblock Labtop 250 Pump
Free shipping available
BLE1900209
Click 'buy now' through our site to checkout with free shipping! We accept major credit cards
Vacuubrand MZ-2T Diaphragm Pump
Free shipping available
BLE150044
Click 'buy now' through our site to checkout with free shipping! We accept major credit cards
Almatec QF150S Quattro Flow Diaphragm Pump
Free shipping available
BLE1900445
Click 'buy now' through our site to checkout with free shipping! We accept major credit cards
Essen Instruments Pipeline Dispenser (Cat No 4355)
Sold out
Price: $1,950.00
BLE150241
SN 02005
- Dispense Speeds - 4, 6, and 8 mL/s approx.
- Programmable volumes
- 0.1 mL—99.9 mL - 0.1 mL increments
- 100 mL—9999 mL - 1.0 mL increments
- Memory - 8 user presets
- Accuracy—Typical - ± (2.0% + 0.12 mL)
- Dimensions (H x W x D) - 14” x 11.25” x 8.5” (355 x 285 x 216 mm)
- Weight - 24.5 lbs (9.15 Kg)
Click 'buy now' through our site to checkout with free shipping! We accept credit card through Paypal.
Flowtech Labtop 400
BLE1900541
Click 'buy now' through our site to checkout! We accept major credit cards
Watson Marlow 205U Peristaltic Pump
Sold out
BLE1800420
Flow rates from 0.0006 to 22.0 ml/min
25 pin D connection for analog control
Auto/manual select through keypad
5V square wave or analog tacho output
Manual speed control
LCD display of pump speed
Remote speed control via analog signals up to 30V or 32mA or potentiometer
Auto restart and keypad lock functions
Manual control of stop/start, direction and priming via membrane keypad
Fitted with 205CA 8-roller low pulse pump head
Remote operation of stop/start and direction via contact or TTL switching
Accepts manifold tube elements, 0.13mm to 2.79mm bore
Motor running/stopped status via 5V Hi/Low signal output
From 4 to 32 channels available
Instant stops and reverse
Click 'buy now' through our site to checkout with free shipping! We accept major credit cards.
Sold items -- Please inquire about others in stock; We get daily shipments
|
|
|
