Beckman Avanti J-E Centrifuge (Cat No 369001)

SKU: BLE1800290
$0.00
Unavailable

BLE1800290


Contact for Price

SN JSE04C08


  • Excellent Condition. Tested and ready to ship. Includes 30 day money back guarantee!!!
  • Height: 91.4 cm (36 in); with door open 152.4 cm (60 in)
  • Width: 63.5 cm (25 in)
  • Depth: 80.0 cm (31.5 in)
  • Weight: 267.4 kg (589 lb)
  • Approximate Acceleration Time: Two profiles--MAX (full acceleration to set speed) and SLOW
  • Approximate Deceleration Time: Three profiles--MAX, SLOW, and OFF (coast)
  • Electrical Requirements: 50 Hz, 180 to 253 VAC, 24 A; 60 Hz, 187to229/216to264 VAC, 24 A
  • Friction Reduction System (FRS): 190 mm (7.5 in) Hg
  • Maximum Heat Dissipation into Room under Steady-State Conditions: 2.0 kW (6,900 Btu/hr)
  • Noise Level 1 Meter in Front of Centrifuge: < 64 dBA
  • Set Speed: Actual rotor speed ± 50 rpm of set speed
  • Set Temperature: -10° C to +40° C in 1° C increments
  • Set Time: to 99 hr 59 min or continuous (hold)
  • Speed Range: 300 to 21,000 rpm
  • Temperature Control: ± 2° C of set temperature (after equilibration)
  • Ambient Temperature Range: 15° C to 35° C
  • Clearances Required: 7.6 cm (3.0 in) sides; 16.0 cm (6.25 in) rear
  • Humidity Restrictions: < 95% (noncondensing)
  • Pollution Degree: 2
  • Time -- Actual Display: Indicates run time remaining/displays elapsed time
  • Finish: Control panel: silicone elastomer. Top surface: urethane paint. Other surfaces: general purpose paint.
1 available