- Shakers
- >
- Large Incubator Shakers
- >
- Infors Triple stacked AJ125 Incubator Shakers
Infors Triple stacked AJ125 Incubator Shakers
SKU:
BLE1800463
$0.00
Unavailable
per item
Contact for Price
SN 88250409BX2
Includes:
Heating
Shaking
CO2
Excellent condition, tested and ready to ship. Includes 30 day money back guarantee!!!
All 3 units has 33"x18.5" platform to accept sticky tape for the use of any flasks of any size
OPERATION
• Splash-proof keypad with LED display, easily seen from across the lab
• On/Off control with alternating display of speed and temperature during run mode
• Operation resumed after closing door after power failure
• Platform released when door fully opened without the need of a latch
• Alarm modes available for external output via RS232, 0-10V, or 4-20mA
CONSTRUCTION
• Lightweight polyurethane housing
• Available in single, double, or triple configuration with comfortable working height
• Dual cross-blower fans located inside a fully insulated and sealed chamber
• Excellent temperature control uniformity with temperature profiles available
• Cooling available for individual temperature control of each cabinet
• Protected drive motor located outside the incubation chamber
• Work light provided and activated by pressing any function key
• Standard clamp trays or sticky stuff trays available
• Tray platform slides over doors
SN 88250409BX2
Includes:
Heating
Shaking
CO2
Excellent condition, tested and ready to ship. Includes 30 day money back guarantee!!!
All 3 units has 33"x18.5" platform to accept sticky tape for the use of any flasks of any size
OPERATION
• Splash-proof keypad with LED display, easily seen from across the lab
• On/Off control with alternating display of speed and temperature during run mode
• Operation resumed after closing door after power failure
• Platform released when door fully opened without the need of a latch
• Alarm modes available for external output via RS232, 0-10V, or 4-20mA
CONSTRUCTION
• Lightweight polyurethane housing
• Available in single, double, or triple configuration with comfortable working height
• Dual cross-blower fans located inside a fully insulated and sealed chamber
• Excellent temperature control uniformity with temperature profiles available
• Cooling available for individual temperature control of each cabinet
• Protected drive motor located outside the incubation chamber
• Work light provided and activated by pressing any function key
• Standard clamp trays or sticky stuff trays available
• Tray platform slides over doors
- EXTERNAL DIMENSIONS AND WEIGHTTriple 80” (H) x 42” (W) x 34” (D) Wt. 695 lb.
- Single Unit 21” (H) x 42” (W) x 34” (D) Wt. 195 lb.
- Double stack 49” (H) x 42” (W) x 34” (D) Wt. 390 lb.
- Triple stack 69” (H) x 42” (W) x 34” (D) Wt. 585 lb.
- Humidity Control Up to 85% RH (exist in unit 1 and 2 from bottom)
- CO2 Control for each chamber
- Technical Details Multitron Standard
- Shaking motion: orbital
- Shaking speed: 20 - 400 rpm
- Shaking diameter: 25 or 50 mm
- Accuracy: 1% at max. speed
- Temperature range: 5°C above room temperature up to 65°C -15°C below room temperature up to 65°C
- Precision: ± 0.2°C (Pt100 sensor)
- Air circulation: 360 m3/h
- Heating capacity: 700 W
- Cooling capacity (if fitted): 900 W
- Interface: RS-232, bi-directional
- Power supply: 115/230 V ±10%, 50/60 Hz
Sold out