Parameter BPG 300/500 Column
Autoclavable 121°C for 30 min, except for the bed support
Bed height 3-25 cm
Bed Height Packing With Extension Max. 33 cm cm
Bed Height Running With Extension Max.145 cm
Bed support Net
Bed volume2 0.6-17.2 l
Bed Volume Packing With Extension Max. 22.7 l l
Bed Volume Running With Extension Max. 330.9 l
Column Cross Section Area 688 cm²
Compliance The product fulfills valid directives and standards when used within the conditions specified in the user manual. The product must also be used in the same state as it was delivered from GE Healthcare and connected only to other CE labeled GE Healthcare modules or other products as recommended. For regulatory details please see declaration of conformity.
Connections 25 mm TC
Dimensions 690 x 690 x 1330 mm
Foot Print 690 x 690 mm
Inlet Dimension i.d.10 mm
Material (bed support) Polyamid (PA), Polyetheretherketone (PEEK), Polypropylene (PP)
Material (column tube) Glass Borosilicate 3.3
Material (Distributor)'Polypropylene (PP)
Material (Lid) 316L Stainless Steel (SS)
Material (Seal) Ethylene propylene diene (EPDM), Fluoroethenepropene (FEP)
Material (Stand) 316L Stainless Steel (SS)
Operating pressure max. 4 bar (58.01 psi)
Operating Temperature 4°C-40°C
Order Information Stand not included for column sizes 100-200
Outer Height 1330 mm
Porosity 10 µm, 12 µm, 23 µm and 54 µm
Surface Finish, Stainless Steel Internal Wetted Glass Ra < 0.4 μm, SS UNS S32205, SS UNS S31803, SS ASTM 316L Ra 0.5 μm
Surface Finish Stainless Steel Non-Wetted Parts Ra Electropolished 3 μm
Weight 68 kg
Column i.d. 300 mm
Tube height 500 mm
Autoclavable 121°C for 30 min, except for the bed support
Bed height 3-25 cm
Bed Height Packing With Extension Max. 33 cm cm
Bed Height Running With Extension Max.145 cm
Bed support Net
Bed volume2 0.6-17.2 l
Bed Volume Packing With Extension Max. 22.7 l l
Bed Volume Running With Extension Max. 330.9 l
Column Cross Section Area 688 cm²
Compliance The product fulfills valid directives and standards when used within the conditions specified in the user manual. The product must also be used in the same state as it was delivered from GE Healthcare and connected only to other CE labeled GE Healthcare modules or other products as recommended. For regulatory details please see declaration of conformity.
Connections 25 mm TC
Dimensions 690 x 690 x 1330 mm
Foot Print 690 x 690 mm
Inlet Dimension i.d.10 mm
Material (bed support) Polyamid (PA), Polyetheretherketone (PEEK), Polypropylene (PP)
Material (column tube) Glass Borosilicate 3.3
Material (Distributor)'Polypropylene (PP)
Material (Lid) 316L Stainless Steel (SS)
Material (Seal) Ethylene propylene diene (EPDM), Fluoroethenepropene (FEP)
Material (Stand) 316L Stainless Steel (SS)
Operating pressure max. 4 bar (58.01 psi)
Operating Temperature 4°C-40°C
Order Information Stand not included for column sizes 100-200
Outer Height 1330 mm
Porosity 10 µm, 12 µm, 23 µm and 54 µm
Surface Finish, Stainless Steel Internal Wetted Glass Ra < 0.4 μm, SS UNS S32205, SS UNS S31803, SS ASTM 316L Ra 0.5 μm
Surface Finish Stainless Steel Non-Wetted Parts Ra Electropolished 3 μm
Weight 68 kg
Column i.d. 300 mm
Tube height 500 mm