OPERATION
• Splash-proof keypad with LED display, easily seen from across the lab
• On/Off control with alternating display of speed and temperature during run mode
• Operation resumed after closing door after power failure
• Platform released when door fully opened without the need of a latch
• Alarm modes available for external output via RS232, 0-10V, or 4-20mA
CONSTRUCTION
• Lightweight polyurethane housing
• Available in single, double, or triple configuration with comfortable working height
• Dual cross-blower fans located inside a fully insulated and sealed chamber
• Excellent temperature control uniformity with temperature profiles available
• Cooling available for individual temperature control of each cabinet
• Protected drive motor located outside the incubation chamber
• Work light provided and activated by pressing any function key
• Standard clamp trays or sticky stuff trays available
• Tray platform slides over doors
Dimensions (W x D x H)875 x 1070 x 550 mm (one unit) / 875 x 1070 x 1760 mm (three units)
Maximum working height 135 mm (one unit) / 1300 mm (three units)
Number of batches 197 per unit
Volume 21 L per unit
Maximum load 19 kg per unit
Maximum expansion Up to 3 units can be stacked
Rotation speed 20–400 min-1 depending on load and stacking
Shaking throw 25 mm / 50 mm
Temperature 6 °C above RT to 65 °C
12 °C below RT to 65 °C (with top cooling)
13 °C below RT to 65 °C (with lateral cooling)
Minimum temperature 4 °C
Standard parameters Temperature, rotation speed, timer
Optional parameters Cooling
Ambient humidity (rH)Up to 85 % non-condensing
Power supply 115/230 V ± 10%, 50/60 Hz
Interface serial