Beckman Avanti J-26 XP Centrifuge
Contact for price
BLE2100004
Height 86 cm (34”); with door open 149 cm (58.7”)
Width 71 cm (28“)
Depth 86 cm (34”); 102 cm (40.25”) (includes air diverter extending from back panel)
Weight 290 kg (640 lbs)
Friction Reduction System (FRS) Mechanical rotary vane pump reduces chamber pressure to 0.25 ATM (190 mm [7.5”] Hg)
Max capacity volume range 6 liters
Max speed 26,000 rpm
Noise level (0.91meters /3' in front of centrifuge) < 57 dbA
Max heat dissipation into room (steady-state conditions) 2.0 kW (6,900 Btu/hour)
Rotor ID Manual
Set temperature -10° C to +40° C (in 1° C increments)
Set time 1 min-3 hours, Hold
Refrigeration system Non-CFC, non-ozone depleting refrigerant
Speed control ± rpm of set speed or 0.1%, whichever is greater
Speed range 100 to 26,000 rpm or equivalent RCF; 0 to 5,000 rpm for elutriation
Temperature control ± 2° C of set temperature (after equilibration)
Zonal capability No
Single tube sample volume range 1.5 - 1,000 mL
Ambient temperature range 15° C to 40° C
Clearances required 7.6 cm (3.0”) sides; 16.0 cm (6.25”) rear
Door 6.1 cm (2.4”) thick structural foam with steel plate
Humidity restrictions < 95% (non-condensing)
Pollution degree 2
Rotor chamber diameter 51.3 cm (20”)
Time–actual display Indicates run time remaining (timed run) or elapsed time (hold run)
Maximum force at r max (g) 82,000 x g