Mettler Toledo AT261DR Balance for Sale
BLE1700260
- Readability: 0.01 mg (0.1 mg)
- Weighing capacity: 62 g (205 g)
- Taring range: 0…205 g
Model AT261 :
Readability: 0.01 mg (0.1 mg)
Weighing capacity: 62 g (205 g)
Taring range: 0…205 g
The AT261 model is a DeltaRange® balances. It is ten times more accurate, movable fine range, which shows an additional decimal place. Thus, for example, the AT261 has a resolution of 0.1 mg over the entire weighing range and a movable fine range with a resolution of 0.01 mg. This fine range can be called up at any point in the whole weighing range as often as liked. The movable fine range covers 62 g. Each time you set the balance to zero (tare) with the «ReZero» key, the fine range is switched in. If the span of the fine range is exceeded, the balance automatically switches into the coarse range.
Automatic proFACT 3-point self-calibration.
The AT balances let you forget about calibration once and for all. With every change in temperature, two motor-driven internal calibration weights automatically adjust the linearity of the balance with reference to three fixed points across the weighing range. The balance automatically self-calibrates (as needed).
Multiple weighing units: A simple one-step operation is all it takes to switch between weighing units. Among the units available: grams, milligrams, ounces, troy ounces, grains, pennyweights, mommes, or carats. And to protect menu settings from changes, simply activate built-in data security feature to lock in your desired settings.
Easy-to-read display: The AT20, AT201, and AT261 have a high-contrast liquid crystal display. All models include the Mettler Toledo Delta Trac display, which graphically shows where you are in the weighing range.And depending on the function, the Delta Trac display will change to show other graphic symbols to assist in your weighings.
Adapters assure precise weighings every time: The vibration adapter and the weighing process adapter work together to assure you of the best possible weighing results in the shortest possible time. The vibration adapter lets you set the balance for ideal, normal or adverse conditions
Nothing affects your results. The weighing process adapter controls the last digit of your display, suppressing it until the readout is stable.
Select the adapter setting according to your weighing application: dispensing, universal setting, absolute weighing, or special applications. Choosing the appropriate setting means you get results as quickly as possible.
Automatic stability detector: This menu-selectable function lets you slow down the stabilization rate for better reproducibility.
Motion detection symbol on display disappears, indicating that the balance is stabilized and ready for weighing.
Motorized draft shield: The glass draft shield is completely automatic to make your weighing procedures more convenient. The draft shield can be opened at either side and at the top. You can program the balance to open all doors at once, or any combination that is convenient to you. You can also control the doors through the balance's built-in data interface. Or if you prefer, you can still operate the doors manually.
Built-in CL and RS-232-C interface: Each AT balance includes a built-in Mettler Toledo CL (20mA current loop) interface that lets you add adapters to link up with systems having an IEEE-488 interface. And the RS-232-C operates bidirectionally at all standard transfer rates from 150 to 9600bps, for connection to computers, printers or other peripheral instruments.
Ergonomically constructed: Every feature on the AT balances has been designed to make your job easier. The weighing pan is built very low to the surface, so you can rest your hand on the table when dispensing the sample.
Access to the weighing chamber has never been better thanks to the nominal framework needed
for the draft shield.
Click 'buy now' through our site to checkout with free shipping! We accept credit card through Paypal.